# What post processor do you use for the onefinity in Vcarve pro

**URL:** <https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542>\
**Category:** Uncategorized\
**Created:** [July 5, 2021, 2:51pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542 "2021-07-05T14:51:06Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@peter](https://forum.onefinitycnc.com/u/peter)\
**Post date:** [July 5, 2021, 2:51pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542/1 "2021-07-05T14:51:06Z")

</div>

what post processor do you use for the onefinity in Vcarve pro

---

<div class="post-metadata">

**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\
**Post date:** [July 5, 2021, 3:45pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542/2 "2021-07-05T15:45:05Z")

</div>

[Onefinity (Inch).pp](https://forum.onefinitycnc.com/uploads/short-url/kIxdetZGy72PEY9gAkHnsVsaKc0.pp) (5.0 KB)

---

<div class="post-metadata">

**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\
**Post date:** [July 5, 2021, 3:45pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542/3 "2021-07-05T15:45:31Z")

</div>

[Onefinity (MM).pp](https://forum.onefinitycnc.com/uploads/short-url/9IgnMOD0ORAmivKyISnElj8OsIP.pp) (5.1 KB)

---

<div class="post-metadata">

**Author:** ![RedStone](https://avatars.discourse-cdn.com/v4/letter/r/bbce88/32.png) [@RedStone](https://forum.onefinitycnc.com/u/RedStone)\
**Post date:** [October 18, 2023, 11:34pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542/4 "2023-10-18T23:34:30Z")

</div>

I am working with an older version of Vcarve Pro and cant seem to get any pp on the site to work without an error.

---

<div class="post-metadata">

**Author:** ![peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@peter](https://forum.onefinitycnc.com/u/peter)\
**Post date:** [October 19, 2023, 1:02am UTC](https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542/5 "2023-10-19T01:02:07Z")

</div>

Onefinity (inch) (\*.ngc)

---

<div class="post-metadata">

**Author:** ![RedStone](https://avatars.discourse-cdn.com/v4/letter/r/bbce88/32.png) [@RedStone](https://forum.onefinitycnc.com/u/RedStone)\
**Post date:** [October 19, 2023, 1:14am UTC](https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542/6 "2023-10-19T01:14:31Z")

</div>

Thanks Peter, my version does not have the pp listed. I tried downloading the ones across the forum but I continue to receive the error “VAR POWER = [P|C|S|1.0|10.0]”

---

<div class="post-metadata">

**Author:** ![peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@peter](https://forum.onefinitycnc.com/u/peter)\
**Post date:** [October 19, 2023, 1:57am UTC](https://forum.onefinitycnc.com/t/what-post-processor-do-you-use-for-the-onefinity-in-vcarve-pro/6542/7 "2023-10-19T01:57:30Z")

</div>

Not realy sure what the problem is. I started with V10 and it was on the list of pp’s in the software. You may need to contact Vectrics or update to a later version if you can