# What Post Processor to use with the RealTime Controller/Redline HMI? (FAQ)

**URL:** <https://forum.onefinitycnc.com/t/what-post-processor-to-use-with-the-realtime-controller-redline-hmi-faq/36165>\
**Category:** Elite Series Gen 2 Official FAQs\
**Created:** [November 11, 2025, 5:14pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-to-use-with-the-realtime-controller-redline-hmi-faq/36165 "2025-11-11T17:14:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 11, 2025, 5:14pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-to-use-with-the-realtime-controller-redline-hmi-faq/36165/1 "2025-11-11T17:14:58Z")

</div>

## **Post Processors**

What Post Processor should you use for the RealTime Controller/Redline HMI?

Both Vectric and Carveco have them built in.

- **Carveco** (ensure you are on the lastest version. Older versions of Carveco do not have them preloaded):

 ![Carveco Post Processors Realtime](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/1/a1744c940b3838778eb140a6974ef4c69a9dcbca.png)

- **Vectric** (ensure you are on the lastest version. Older versions of Vectric do not have them preloaded):

 ![Realtime Vectric Post Processor](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/c/5c16ae1ed62f02eb882fd1096f262d98cad556d6.png)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/7/e76736e9290c9e8e9f73610c974e39860ae35f8d.jpeg "Setup A Post Processor & Exporting Gcode For Vectric with the Redline Motion Control System") ](https://www.youtube.com/watch?v=RZJ6wh-3KDU)

* * *

You can manually download them here:

> **[Post Processors - RealTime CNC](https://realtimecnc.com/postp/)**

---

<div class="post-metadata">

**Author:** ![JimHatch](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jimhatch/32/3928_2.png) [@JimHatch](https://forum.onefinitycnc.com/u/JimHatch)\
**Post date:** [November 11, 2025, 6:28pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-to-use-with-the-realtime-controller-redline-hmi-faq/36165/2 "2025-11-11T18:28:47Z")

</div>

> [@OnefinityCNC](#):
>
> Post processors have been submitted to both **Carveco** and **Vectric** for inclusion in future software updates.

I got mine from the Vcarve machine & post-processor lists. Since you’re just announcing the submission for future versions, does that mean the one I got from Vectric last week is not the correct one and I need to get it from the RTC link?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 11, 2025, 6:33pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-to-use-with-the-realtime-controller-redline-hmi-faq/36165/3 "2025-11-11T18:33:05Z")

</div>

Looks like they just added them! 🙂

---

<div class="post-metadata">

**Author:** ![\_shrug](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/_shrug/32/34131_2.png) [@\_shrug](https://forum.onefinitycnc.com/u/_shrug)\
**Post date:** [December 10, 2025, 8:44pm UTC](https://forum.onefinitycnc.com/t/what-post-processor-to-use-with-the-realtime-controller-redline-hmi-faq/36165/4 "2025-12-10T20:44:37Z")

</div>

How about for FreeCAD?