# When I start my machine **URL:** \ **Category:** Uncategorized\ **Created:** [January 15, 2022, 9:02pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404 "2022-01-15T21:02:59Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![davidsmith](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@davidsmith](https://forum.onefinitycnc.com/u/davidsmith)\ **Post date:** [January 15, 2022, 9:02pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/1 "2022-01-15T21:02:59Z")
When I boot it comes to home machine request but machine doesn’t move even though dro z axis says it is This thing is dead in the water even though I put it to bed working HELP ---
**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\ **Post date:** [January 15, 2022, 9:12pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/2 "2022-01-15T21:12:56Z")
I had mine do this to me once. I did several things and I don’t know which one was the actual fix. I toggled the on-screen e-stop a couple of times. I toggled the physical e-stop a couple of times. I restarted using the restart button. I restarted using the shutdown button. It started working after the last one, but one of the other things may have helped. Good luck! ---
**Author:** ![davidsmith](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@davidsmith](https://forum.onefinitycnc.com/u/davidsmith)\ **Post date:** [January 15, 2022, 9:22pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/3 "2022-01-15T21:22:29Z")
Thanks for the response I tried almost all of your suggestions to the letter but nothing Is your machine in a warm space Thanks Dave ---
**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\ **Post date:** [January 15, 2022, 9:52pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/4 "2022-01-15T21:52:27Z")
Nope. Unconditioned. Did your screen look something like this? ![20211220_123725](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/7/07ce6e204076851ac27861624451d00464726759.jpeg) ---
**Author:** ![davidsmith](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@davidsmith](https://forum.onefinitycnc.com/u/davidsmith)\ **Post date:** [January 15, 2022, 10:00pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/5 "2022-01-15T22:00:39Z")
It looked exactly like that ---
**Author:** ![davidsmith](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@davidsmith](https://forum.onefinitycnc.com/u/davidsmith)\ **Post date:** [January 15, 2022, 10:03pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/6 "2022-01-15T22:03:01Z")
Just my toolpaths say ok and z says over ---
**Author:** ![davidsmith](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@davidsmith](https://forum.onefinitycnc.com/u/davidsmith)\ **Post date:** [January 15, 2022, 10:04pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/7 "2022-01-15T22:04:53Z")
My machine is in about 60 degrees fahr ---
**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\ **Post date:** [January 15, 2022, 10:06pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/8 "2022-01-15T22:06:42Z")
What version of firmware? ---
**Author:** ![davidsmith](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@davidsmith](https://forum.onefinitycnc.com/u/davidsmith)\ **Post date:** [January 15, 2022, 10:13pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/9 "2022-01-15T22:13:00Z")
Firmware is version 1.0.8 ---
**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\ **Post date:** [January 15, 2022, 10:26pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/10 "2022-01-15T22:26:34Z")
Mine was 1.0.9 when it did it, so I’m assuming not firmware related. It seems like it could be an issue with the motor controllers not starting up as expected. I’d reach out to [support@onefinitycnc.com](mailto:support@onefinitycnc.com). Tagging @OnefinityCNC here just for visibility. ---
**Author:** ![davidsmith](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@davidsmith](https://forum.onefinitycnc.com/u/davidsmith)\ **Post date:** [January 15, 2022, 10:36pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/11 "2022-01-15T22:36:58Z")
Sounds good I sent off an email already. I appreciate your help nick I’m new at this Thanks Dave ---
**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\ **Post date:** [January 15, 2022, 10:45pm UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/12 "2022-01-15T22:45:54Z")
The last thing I would try is the standard IT method. Do a full shutdown, power off the switch, hit the physical e-stop, unplug the controller and wait 10 minutes or so. Then do the reverse and boot-up. That theoretically allows all residual power time to discharge and hopefully would resolve the bug. Godspeed and good luck! ---
**Author:** ![jarrfarr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jarrfarr/32/4810_2.png) [@jarrfarr](https://forum.onefinitycnc.com/u/jarrfarr)\ **Post date:** [January 16, 2022, 12:28am UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/13 "2022-01-16T00:28:09Z")
Try clicking the soft e-stop on the screen. That should ‘reset’ it. ---
**Author:** ![davidsmith](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@davidsmith](https://forum.onefinitycnc.com/u/davidsmith)\ **Post date:** [January 16, 2022, 2:40am UTC](https://forum.onefinitycnc.com/t/when-i-start-my-machine/10404/14 "2022-01-16T02:40:35Z")
Hi Yah I tried that many times over and nothing fixes the issue Thanks Dave