# Where to find stl file for the 3d printed part of "Onefinity 3-Axis Touch Probe"

**URL:** <https://forum.onefinitycnc.com/t/where-to-find-stl-file-for-the-3d-printed-part-of-onefinity-3-axis-touch-probe/9563>\
**Category:** Touch Probe\
**Created:** [December 15, 2021, 8:30pm UTC](https://forum.onefinitycnc.com/t/where-to-find-stl-file-for-the-3d-printed-part-of-onefinity-3-axis-touch-probe/9563 "2021-12-15T20:30:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![patr0805](https://avatars.discourse-cdn.com/v4/letter/p/4af34b/32.png) [@patr0805](https://forum.onefinitycnc.com/u/patr0805)\
**Post date:** [December 15, 2021, 8:30pm UTC](https://forum.onefinitycnc.com/t/where-to-find-stl-file-for-the-3d-printed-part-of-onefinity-3-axis-touch-probe/9563/1 "2021-12-15T20:30:47Z")

</div>

There is a 3d printed part of the touch probe that has a magnet on top. You attach this to the spindle tool.  
My problem is that this 3d printed part has snapped in two.

Where can I find the stl file for this 3d printed part of “Onefinity 3-Axis Touch Probe”?

---

<div class="post-metadata">

**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\
**Post date:** [December 15, 2021, 8:43pm UTC](https://forum.onefinitycnc.com/t/where-to-find-stl-file-for-the-3d-printed-part-of-onefinity-3-axis-touch-probe/9563/2 "2021-12-15T20:43:22Z")

</div>

Patrick,

You can reach out to @charleyntexas Charley as he makes them for OneFinity and can help.

-Alex

---

<div class="post-metadata">

**Author:** ![charleyntexas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/charleyntexas/32/118_2.png) [@charleyntexas](https://forum.onefinitycnc.com/u/charleyntexas)\
**Post date:** [December 15, 2021, 10:32pm UTC](https://forum.onefinitycnc.com/t/where-to-find-stl-file-for-the-3d-printed-part-of-onefinity-3-axis-touch-probe/9563/3 "2021-12-15T22:32:45Z")

</div>

Here is the file Alex,

[Mag holder V5.stl](https://forum.onefinitycnc.com/uploads/short-url/9dtN2WFm45tEuFkgZX7TaFppIMT.stl) (34.8 KB)

---

<div class="post-metadata">

**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\
**Post date:** [December 16, 2021, 12:30am UTC](https://forum.onefinitycnc.com/t/where-to-find-stl-file-for-the-3d-printed-part-of-onefinity-3-axis-touch-probe/9563/4 "2021-12-16T00:30:34Z")

</div>

Thanks Charlie!!!

Patrick, here is the file you requested. @patr0805

-Alex