# Wife very happy with my Redline Update

**URL:** <https://forum.onefinitycnc.com/t/wife-very-happy-with-my-redline-update/39413>\
**Category:** RealTime Controller (RTCNC)\
**Created:** [July 27, 2026, 9:40pm UTC](https://forum.onefinitycnc.com/t/wife-very-happy-with-my-redline-update/39413 "2026-07-27T21:40:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Woodpecker](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/woodpecker/32/27447_2.png) [@Woodpecker](https://forum.onefinitycnc.com/u/Woodpecker)\
**Post date:** [July 27, 2026, 9:40pm UTC](https://forum.onefinitycnc.com/t/wife-very-happy-with-my-redline-update/39413/1 "2026-07-27T21:40:55Z")

</div>

Been lurking around for a long time now I am Elite Foreman Gen1 Masso guy from Day 1..

Masso was ok But the most important feature I think is the override feed rate and spindle speed.

Waited for over two years to get that from Masso, Just Dumb!! So moved onto the Redline

Controller and for sure it checks All the boxes !!! GREAT JOB 1F and the Redline team!!!

Took my set up for a “Hard” test drive over the weekend and Wife very HAPPY with me 🙂

Cut this with the new controller on a HMI and got a nice Big Kiss

 ![frame](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/2/826473a77c451a33729c91ec692c668e52221c8a.jpeg)

1/4EM roughing pass

1/8 BN Finishing pass

1/8 EM Cutout

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [July 27, 2026, 9:49pm UTC](https://forum.onefinitycnc.com/t/wife-very-happy-with-my-redline-update/39413/2 "2026-07-27T21:49:39Z")

</div>

Love to hear you are loving the @RTCNC controller and @Redlinecnc screen! A great combo!  
Wonderful work!

---

<div class="post-metadata">

**Author:** ![Woodpecker](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/woodpecker/32/27447_2.png) [@Woodpecker](https://forum.onefinitycnc.com/u/Woodpecker)\
**Post date:** [July 27, 2026, 9:58pm UTC](https://forum.onefinitycnc.com/t/wife-very-happy-with-my-redline-update/39413/3 "2026-07-27T21:58:24Z")

</div>

Not talked about enough but the responsiveness of the screen/controller and overall  
GUI layout is Best in Class.

---

<div class="post-metadata">

**Author:** ![Woodpecker](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/woodpecker/32/27447_2.png) [@Woodpecker](https://forum.onefinitycnc.com/u/Woodpecker)\
**Post date:** [July 27, 2026, 10:00pm UTC](https://forum.onefinitycnc.com/t/wife-very-happy-with-my-redline-update/39413/4 "2026-07-27T22:00:32Z")

</div>

O and one more thing. Thank you for not charging us for software/firmware updates