# Wimaxit 15.6 touchscreen - no touch-

**URL:** <https://forum.onefinitycnc.com/t/wimaxit-15-6-touchscreen-no-touch/12510>\
**Category:** TouchScreen\
**Created:** [April 16, 2022, 9:27pm UTC](https://forum.onefinitycnc.com/t/wimaxit-15-6-touchscreen-no-touch/12510 "2022-04-16T21:27:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![pdfrank3510](https://avatars.discourse-cdn.com/v4/letter/p/cdc98d/32.png) [@pdfrank3510](https://forum.onefinitycnc.com/u/pdfrank3510)\
**Post date:** [April 16, 2022, 9:27pm UTC](https://forum.onefinitycnc.com/t/wimaxit-15-6-touchscreen-no-touch/12510/1 "2022-04-16T21:27:25Z")

</div>

Anyone using the Wimaxit 15.6 touchscreen monito? What is the secret to getting the touch to work? I have the USB C port labelled “Power” going to ac power and the HDMI connected to the Onefinity HDMI controller. The other USB C port on the monitor is connected to one of the USB ports on the controller. I thought that was all you needed, but guess I’m missing something. I do have video, just no touch. This monitor is one of the ones listed by Onefinity as compatible.

Thanks for any help you can provide

---

<div class="post-metadata">

**Author:** ![pdfrank3510](https://avatars.discourse-cdn.com/v4/letter/p/cdc98d/32.png) [@pdfrank3510](https://forum.onefinitycnc.com/u/pdfrank3510)\
**Post date:** [April 17, 2022, 12:29pm UTC](https://forum.onefinitycnc.com/t/wimaxit-15-6-touchscreen-no-touch/12510/2 "2022-04-17T12:29:05Z")

</div>

I figured it out. Turns out the USB C cable I was using to go from monitor to controller was a charging only cable. I swapped out another cable and the touch screen is working now!

---

<div class="post-metadata">

**Author:** ![bdykstra712](https://avatars.discourse-cdn.com/v4/letter/b/e0b2c6/32.png) [@bdykstra712](https://forum.onefinitycnc.com/u/bdykstra712)\
**Post date:** [May 28, 2022, 2:29pm UTC](https://forum.onefinitycnc.com/t/wimaxit-15-6-touchscreen-no-touch/12510/3 "2022-05-28T14:29:26Z")

</div>

Glad you got it working. How has this monitor been working for you? Any issues?

---

<div class="post-metadata">

**Author:** ![pdfrank3510](https://avatars.discourse-cdn.com/v4/letter/p/cdc98d/32.png) [@pdfrank3510](https://forum.onefinitycnc.com/u/pdfrank3510)\
**Post date:** [May 28, 2022, 11:16pm UTC](https://forum.onefinitycnc.com/t/wimaxit-15-6-touchscreen-no-touch/12510/4 "2022-05-28T23:16:27Z")

</div>

Mostly good. The screen flickers when the temp in my garage is below 50 degrees which is a little annoying.

---

<div class="post-metadata">

**Author:** ![Pawdust](https://avatars.discourse-cdn.com/v4/letter/p/3ab097/32.png) [@Pawdust](https://forum.onefinitycnc.com/u/Pawdust)\
**Post date:** [August 3, 2023, 11:05pm UTC](https://forum.onefinitycnc.com/t/wimaxit-15-6-touchscreen-no-touch/12510/5 "2023-08-03T23:05:20Z")

</div>

The issue I’m having with this monitor. The front screen works good when touching it. But when I go into files. And try to touch on a file it touches another spot on the screen. Anybody have that problem.