# Wireless joystick **URL:** \ **Category:** Uncategorized\ **Created:** [January 30, 2023, 9:49am UTC](https://forum.onefinitycnc.com/t/wireless-joystick/18477 "2023-01-30T09:49:24Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![bkwoood](https://avatars.discourse-cdn.com/v4/letter/b/f04885/32.png) [@bkwoood](https://forum.onefinitycnc.com/u/bkwoood)\ **Post date:** [January 30, 2023, 9:49am UTC](https://forum.onefinitycnc.com/t/wireless-joystick/18477/1 "2023-01-30T09:49:24Z")
do you need to keep the usb that came with joystick in the controller all the time to use it or just for setting it up ---
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [January 30, 2023, 9:51am UTC](https://forum.onefinitycnc.com/t/wireless-joystick/18477/2 "2023-01-30T09:51:45Z")
Hey Butch, you always need it, it is the receiver. ---
**Author:** ![bkwoood](https://avatars.discourse-cdn.com/v4/letter/b/f04885/32.png) [@bkwoood](https://forum.onefinitycnc.com/u/bkwoood)\ **Post date:** [January 30, 2023, 9:57am UTC](https://forum.onefinitycnc.com/t/wireless-joystick/18477/3 "2023-01-30T09:57:51Z")
that’s what i thought thanks ---
**Author:** ![ynot](https://avatars.discourse-cdn.com/v4/letter/y/a698b9/32.png) [@ynot](https://forum.onefinitycnc.com/u/ynot)\ **Post date:** [January 30, 2023, 4:25pm UTC](https://forum.onefinitycnc.com/t/wireless-joystick/18477/4 "2023-01-30T16:25:44Z")
Due to my advanced years, with the related eye hand inaccuracies, I bought the 1F. Pending the arrival of a range extender, I surfaced the temp spoilboard yesterday using the joystick. Had trouble separating the X & Y axis control, trying to input Y movement I often got some X movement. Is there any way to separate the X & Y so that either of them is on the left hand “stick” & moves one and one of the other triggers or buttons moves the other? It is a dexterity problem, hopefully the 1F will allow me to keep making nice things out of wood. Thank you. ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [January 30, 2023, 5:17pm UTC](https://forum.onefinitycnc.com/t/wireless-joystick/18477/5 "2023-01-30T17:17:33Z")
use the bumpers: > [@Official Onefinity BB Joystick Controls (How to changes modes) For BB (Buildbotics) Controllers](https://forum.onefinitycnc.com/t/official-onefinity-joystick-controls-how-to-changes-modes/2299): > > This only applies to Onefinity CNC Machines using the BB Buildbotics controller. The correct model is ESM-9013 (pro version will not work) (other model numbers may not move the z axis.) You will never need to install any drivers or software to use the joypad. Ensure you are in the right mode with two blue lights on the top. To use, follow these steps: Insert batterys into the joypad following the diagram below. Insert the usb dongle into any of the 4 usb … ---
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [January 31, 2023, 6:19am UTC](https://forum.onefinitycnc.com/t/wireless-joystick/18477/6 "2023-01-31T06:19:59Z")
Hey Tony, > [@ynot](#): > > Is there any way to separate the X & Y so that either of them is on the left hand “stick” & moves one and one of the other triggers or buttons moves the other? It is a dexterity problem, hopefully the 1F will allow me to keep making nice things out of wood. If you find these gamepads rather flimsy, did you already have a look [at this](https://www.youtube.com/watch?v=DYi2fqv577A)? Could be what you need. - [Remote control panel V3 for Onefinity / Buildbotics CNC controller – Youtube](https://www.youtube.com/watch?v=tAbXmQ1i_EY) - [Onefinity CNC Remote V1.0 – Youtube](https://www.youtube.com/watch?v=DYi2fqv577A) Onefinity CNC Forum Threads: - [Onefinty control panel remote (gamepad replacement with lots of extra options)](https://forum.onefinitycnc.com/t/onefinty-control-panel-remote-gamepad-replacement-with-lots-of-extra-options/8060) - [RELEASE V1: Remote control panel V1 for the Onefinity](https://forum.onefinitycnc.com/t/release-v1-remote-control-panel-v1-for-the-onefinity/8882) Satoer Homepage: - [CNC Remote Control Panel V3](https://satoer.com/cnc-remote-panel-v3/) (recent) - [CNC Remote Control Panel V1](https://satoer.com/cnc-remote-control-panel-v1/) ---
**Author:** ![ynot](https://avatars.discourse-cdn.com/v4/letter/y/a698b9/32.png) [@ynot](https://forum.onefinitycnc.com/u/ynot)\ **Post date:** [January 31, 2023, 3:03pm UTC](https://forum.onefinitycnc.com/t/wireless-joystick/18477/7 "2023-01-31T15:03:57Z")
Thank you AF, I want one, do you think she might go for it as a Valentine’s?? My supply of $100 bills is thin, but … it looks about perfect you are most helpful, your help is most appreciated. Tony.