# Wiring H100 or V70 VFD to GX-12 6-pin spindle control on Elite Masso G3

**URL:** <https://forum.onefinitycnc.com/t/wiring-h100-or-v70-vfd-to-gx-12-6-pin-spindle-control-on-elite-masso-g3/22557>\
**Category:** Spindle/VFD (Aftermarket/Unsupported)\
**Created:** [September 27, 2023, 1:41am UTC](https://forum.onefinitycnc.com/t/wiring-h100-or-v70-vfd-to-gx-12-6-pin-spindle-control-on-elite-masso-g3/22557 "2023-09-27T01:41:49Z")\
**Posts on this page:** 1\
**Page:** 3

<div class="post-metadata">

**Author:** ![Dbiker](https://avatars.discourse-cdn.com/v4/letter/d/4af34b/32.png) [@Dbiker](https://forum.onefinitycnc.com/u/Dbiker)\
**Post date:** [January 29, 2025, 2:23am UTC](https://forum.onefinitycnc.com/t/wiring-h100-or-v70-vfd-to-gx-12-6-pin-spindle-control-on-elite-masso-g3/22557/41 "2025-01-29T02:23:00Z")

</div>

> [@349iq2345](#):
>
> I think it could be part of something (I cannot see the overall circuit) so I would leave it in place but it will not interfere.

YOU USE THE BLUE WIRE ON PIN 7 FOR REV OF THE SPINDLE

[Previous page](https://forum.onefinitycnc.com/t/wiring-h100-or-v70-vfd-to-gx-12-6-pin-spindle-control-on-elite-masso-g3/22557.md?page=2)