# Wont boot past the blue miage screen on display

**URL:** <https://forum.onefinitycnc.com/t/wont-boot-past-the-blue-miage-screen-on-display/16198>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [November 1, 2022, 1:03am UTC](https://forum.onefinitycnc.com/t/wont-boot-past-the-blue-miage-screen-on-display/16198 "2022-11-01T01:03:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Veeshan](https://avatars.discourse-cdn.com/v4/letter/v/ac91a4/32.png) [@Veeshan](https://forum.onefinitycnc.com/u/Veeshan)\
**Post date:** [November 1, 2022, 1:03am UTC](https://forum.onefinitycnc.com/t/wont-boot-past-the-blue-miage-screen-on-display/16198/1 "2022-11-01T01:03:47Z")

</div>

Hey all,

Im having an issue with my onefinity this morning where when i went to boot it up but the display screen wont boot past the blue miage screen that pops up first it just flashes on and off slowly.

[https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/3/9303f5015bfc6542c3f35925de26edc3792ffaf9.mp4](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/3/9303f5015bfc6542c3f35925de26edc3792ffaf9.mp4)

Thanks if anyone knows how to address this issue much appreciated.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 1, 2022, 1:14am UTC](https://forum.onefinitycnc.com/t/wont-boot-past-the-blue-miage-screen-on-display/16198/3 "2022-11-01T01:14:58Z")

</div>

From your video it looks like it’s flashing…did you plug in the usb to wall power?

> [@How to connect the Touch Display (7, 8, 10.8")](https://forum.onefinitycnc.com/t/how-to-connect-the-touch-display-7-8-10-8/5081):
>
> When connecting a touchscreen to the Onefinity controller there are a few key items to make it work correctly: Step 1: POWER: Every screen must be connected to external (wall) power to operate correctly. Skipping this step is the most common mistake users make. On the 7 and 8" screens, the 12v wall power adapter must be connected to the 12v in (red arrow) port. On the 10", there is no 12v power input, instead, a USB C port labeled with a lightning bolt is used (red arrow). This cable must be …

---

<div class="post-metadata">

**Author:** ![Veeshan](https://avatars.discourse-cdn.com/v4/letter/v/ac91a4/32.png) [@Veeshan](https://forum.onefinitycnc.com/u/Veeshan)\
**Post date:** [November 1, 2022, 1:27am UTC](https://forum.onefinitycnc.com/t/wont-boot-past-the-blue-miage-screen-on-display/16198/4 "2022-11-01T01:27:09Z")

</div>

Issue solved display screen wasnt plugged in properly

---

<div class="post-metadata">

**Author:** ![stoughto](https://avatars.discourse-cdn.com/v4/letter/s/9d8465/32.png) [@stoughto](https://forum.onefinitycnc.com/u/stoughto)\
**Post date:** [March 31, 2025, 4:30pm UTC](https://forum.onefinitycnc.com/t/wont-boot-past-the-blue-miage-screen-on-display/16198/5 "2025-03-31T16:30:03Z")

</div>

Same here, thank you, the forum solved the problem quickly.

I did a general clean up and the next day was wondering where that USB-C power came from. Now I know!