# Woodworker Foot Profile **URL:** \ **Category:** Uncategorized\ **Created:** [December 30, 2021, 6:47pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915 "2021-12-30T18:47:59Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\ **Post date:** [December 30, 2021, 6:48pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/1 "2021-12-30T18:48:00Z")
HI All Has anybody got a digital file or dimensions of the following, I would like to make a cover to protect the cables Thanks in advance Dave ![IMG_2767](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/c/b/cba50a29d92d97e71039b060d32c0ca95fb53aeb.jpeg) ---
**Author:** ![Ignoble](https://avatars.discourse-cdn.com/v4/letter/i/8491ac/32.png) [@Ignoble](https://forum.onefinitycnc.com/u/Ignoble)\ **Post date:** [December 30, 2021, 6:54pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/2 "2021-12-30T18:54:31Z")
Onefinity response in another post. > [@Machine Dimensions](https://forum.onefinitycnc.com/t/machine-dimensions/189/5): > Sorry, here’s the dimensions for the Woodworker… > [@Machine Dimensions](https://forum.onefinitycnc.com/t/machine-dimensions/189/6): > ---
**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\ **Post date:** [December 30, 2021, 6:58pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/3 "2021-12-30T18:58:38Z")
Thanks for that info, I’m after the dimensions, widths , heights etc of the foot itself, i.e. end elevation Cheers Dave ---
**Author:** ![Ignoble](https://avatars.discourse-cdn.com/v4/letter/i/8491ac/32.png) [@Ignoble](https://forum.onefinitycnc.com/u/Ignoble)\ **Post date:** [December 30, 2021, 7:01pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/4 "2021-12-30T19:01:13Z")
How are you planning to make the cover? 3D print? There’s plenty of plans available or premade on Etsy. ---
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [December 30, 2021, 7:15pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/5 "2021-12-30T19:15:04Z")
Hey Dave, > [@Buddy](#): > > I would like to make a cover to protect the cables one like this? [onefinity wire cover](https://metager.org/meta/meta.ger3?eingabe=+onefinity++wire++cover&focus=web&s=&f=&m=) [onefinity cable cover](https://metager.org/meta/meta.ger3?eingabe=+onefinity++cable++cover&focus=web&s=&f=&m=) ---
**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\ **Post date:** [December 30, 2021, 7:24pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/6 "2021-12-30T19:24:01Z")
I don’t have access to a 3D printer and was thinking of cutting something out of multiple pieces of ply and gluing them together Regards Dave ---
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [December 30, 2021, 7:32pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/7 "2021-12-30T19:32:16Z")
Hey Dave, > [@Buddy](#): > > was thinking of cutting something out of multiple pieces of ply and gluing them together I like that you want to make them from wood. Less plastic! 🙂 If you had a cnc machine you could also mill one 😉 Unfortunately I did not find the time to make these measurements yet, but Bill @Machinist makes very nice plans, on this one, there wasn’t much that was missing and that he would have measured the holes of the rails. Perhaps he has a plan of the whole foot cross section? > [@Aluminum Extrusion Table](https://forum.onefinitycnc.com/t/aluminum-extrusion-table/4305/39): > > Here’s a document I created for my Machinist, and you just add 16" for the Woodworker. These dimensions worked perfectly for my base. [MACHINIST FOOTPRINT.pdf](https://forum.onefinitycnc.com/uploads/short-url/6KD0qIcwTq1YgKCIdzNXRAd4fz1.pdf) (51.7 KB) Thank Bill @Machinist for this ![MACHINIST_FOOTPRINT __Machinist_BB__ Foot_section_only](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/9/198f3268705b5da00dbd2e48f87c2b8fa3b4392f.png) (excerpt from a file from Bill that I downloaded once a while ago)) ---
**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\ **Post date:** [December 30, 2021, 7:47pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/8 "2021-12-30T19:47:49Z")
Hey Thanks for the prompt replies, the dimensions I’m after are those which would allow me to replicate the profile of the extrusion, not the dimensions of where the feet are located etc. i.e. the dimensions, as the picture shows the foot (extrusion) Sorry for misleading before. Rgards Dave ---
**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\ **Post date:** [December 30, 2021, 10:21pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/9 "2021-12-30T22:21:32Z")
Here you go, this is the profile of the foot. Hole spacing dim’s are centered on the footprint. Let me know if you need anything else! ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/d/0df173704e063de9a1e9a2e2f63f77aeb785c40c.png) ---
**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\ **Post date:** [December 30, 2021, 10:24pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/10 "2021-12-30T22:24:37Z")
Thanks for this Bill and for taking the time to send it to me, I think I’m misleading people, its the dimensions from the end view as per the picture I’m after, in my terminology this is a plan view Thanks anyway Dave ---
**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\ **Post date:** [December 30, 2021, 10:42pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/11 "2021-12-30T22:42:28Z")
My apologies, @Buddy! I just glanced at @349iq2345’s post and _assumed_ you were after the footprint. Hang tight and I’ll get you the profile. BTW, you are most definitely correct, that is the plan view. I didn’t find your OP misleading in the least. ---
**Author:** ![PJR](https://avatars.discourse-cdn.com/v4/letter/p/45deac/32.png) [@PJR](https://forum.onefinitycnc.com/u/PJR)\ **Post date:** [December 30, 2021, 11:03pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/12 "2021-12-30T23:03:54Z")
@Machinist Bill, Thank you for this. I haven’t got my machine yet, but I was thinking of putting blocks under the feet so I could do thick slabs. Now that I know the footprint I can have some blocks ready. Paul ---
**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\ **Post date:** [December 30, 2021, 11:26pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/13 "2021-12-30T23:26:00Z")
You’re very welcome Paul. I had made some spacers for mine as well, but didn’t end up using them. ---
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [December 31, 2021, 1:51am UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/14 "2021-12-31T01:51:23Z")
Hey Bill, hey Dave, hey all, I also understood what you meant Dave @Buddy, that’s what I meant [above](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/7) when I wrote “perhaps Bill has a plan of the whole foot cross section”, it was because this excerpt from Bill’s footprint PDF is already a part of a foot’s cross section, and it’s beautifully made: ![MACHINIST_FOOTPRINT __Machinist_BB__ Foot_section_only](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/9/198f3268705b5da00dbd2e48f87c2b8fa3b4392f.png) ---
**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\ **Post date:** [December 31, 2021, 2:13am UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/16 "2021-12-31T02:13:31Z")
My bad for not reading far enough into the post. My mind jumped to that conclusion all by itself. 🤣 ---
**Author:** ![AndyP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/andyp/32/1106_2.png) [@AndyP](https://forum.onefinitycnc.com/u/AndyP)\ **Post date:** [December 31, 2021, 8:51am UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/17 "2021-12-31T08:51:01Z")
No, but I had to cover mine, so I didn’t damage them every time I walked past them, getting to a not so well placed switch. I just printed a four-sided box with lugs for screws into the table; nowt fancy. ---
**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\ **Post date:** [December 31, 2021, 4:19pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/18 "2021-12-31T16:19:42Z")
I’ve made some covers to protect the cable and plugs, these are 60mm long i.e. 5 pieces of 12mm ply, I’ve attached the Vcarve file if anyone wants to use it. There’s multiple profiles nested on a sheet. ![IMG_2779](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/0/0077372d14a964e662a1b4c92ffe75d45939b564.jpeg) [RAIL ENDs.crv](https://forum.onefinitycnc.com/uploads/short-url/fmojqg3FfDY6EjbXHQeTKzJtXY7.crv) (386 KB) Regards Dave ---
**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\ **Post date:** [January 11, 2022, 10:18pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/19 "2022-01-11T22:18:24Z")
Finally managed to finish something to protect the stepper motor cables and plugs and its made from wood. ![IMG_2824](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/c/cfa11b248d9b00b7188a2d38854db4873acb3d40.jpeg) ![IMG_2822](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/a/9a8de4c4fe09cd5deacfcbf636f795f9fbb4c081.jpeg) ![IMG_2821](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/6/6b1241c120b06080669670e203f45c8cec2dd545.jpeg) ---
**Author:** ![GoodTimberDesign](https://avatars.discourse-cdn.com/v4/letter/g/85e7bf/32.png) [@GoodTimberDesign](https://forum.onefinitycnc.com/u/GoodTimberDesign)\ **Post date:** [January 12, 2022, 2:35pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/20 "2022-01-12T14:35:59Z")
I used electric tape. It’s the same color and was super simple to “design” haha ---
**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.onefinitycnc.com/u/Buddy)\ **Post date:** [January 12, 2022, 6:27pm UTC](https://forum.onefinitycnc.com/t/woodworker-foot-profile/9915/21 "2022-01-12T18:27:36Z")
doh !!! I should have thought of that