# X-50 (Mounted Vertical) Y-Axis Position Holding Issue

**URL:** <https://forum.onefinitycnc.com/t/x-50-mounted-vertical-y-axis-position-holding-issue/25020>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [January 30, 2024, 2:06am UTC](https://forum.onefinitycnc.com/t/x-50-mounted-vertical-y-axis-position-holding-issue/25020 "2024-01-30T02:06:39Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [January 30, 2024, 1:44pm UTC](https://forum.onefinitycnc.com/t/x-50-mounted-vertical-y-axis-position-holding-issue/25020/3 "2024-01-30T13:44:30Z")

</div>

Hey captainslug,

wow, with the X-axis mounted this way, you are not to be envied with the manual tool change. Why didn’t you mount the X-axis reversed, so that the router is above the rails?

Welcome to the forum!

---

_[View the full topic](https://forum.onefinitycnc.com/t/x-50-mounted-vertical-y-axis-position-holding-issue/25020)._