# X and y axis help

**URL:** <https://forum.onefinitycnc.com/t/x-and-y-axis-help/9030>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [November 19, 2021, 9:14pm UTC](https://forum.onefinitycnc.com/t/x-and-y-axis-help/9030 "2021-11-19T21:14:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![keno](https://avatars.discourse-cdn.com/v4/letter/k/f9ae1b/32.png) [@keno](https://forum.onefinitycnc.com/u/keno)\
**Post date:** [November 19, 2021, 9:14pm UTC](https://forum.onefinitycnc.com/t/x-and-y-axis-help/9030/1 "2021-11-19T21:14:08Z")

</div>

the x and y axis are not responding at the same time. there is a very short delay on the x axis. this causes the gantry to kick side ways…any suggestions as to the problem?  
thanks  
sorry guys…its the two y axis motors not responding at the same time…not the x…  
found the problem…y1 cable had one of the wires broken…