# X Axis Dust Collector Hose & Router Cable Mount

**URL:** <https://forum.onefinitycnc.com/t/x-axis-dust-collector-hose-router-cable-mount/26778>\
**Category:** Filefinity (Ready To Run File Site)\
**Created:** [April 30, 2024, 7:52pm UTC](https://forum.onefinitycnc.com/t/x-axis-dust-collector-hose-router-cable-mount/26778 "2024-04-30T19:52:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![HeadlessChicken](https://avatars.discourse-cdn.com/v4/letter/h/97f17d/32.png) [@HeadlessChicken](https://forum.onefinitycnc.com/u/HeadlessChicken)\
**Post date:** [April 30, 2024, 7:52pm UTC](https://forum.onefinitycnc.com/t/x-axis-dust-collector-hose-router-cable-mount/26778/1 "2024-04-30T19:52:22Z")

</div>

Hey everyone,

I have been experiencing EMI while running my Makita router power cable in the X-axis drag chain, which (after much troubleshooting) has made me need to keep the cable outside of it. This has led me to develop a mount that attaches to the X-axis bar on top of the Onefinity bracket that holds down the Z-motor and Z-homing sensor to hold my router cable and my 4-inch dust collector hose. I’ve attached some photos to show better what I am talking about.

I’ve put the STL file here for anyone to download in case they are experiencing the same problem as I was. If you want to tip me or don’t have a printer to make this part, I have an Etsy store I just opened linked below where you can do that.

Edit:  
I forgot to add that if you buy a pair of M6 x 25mm bolts you can then replace the original ones that hold down the Onefinity bracket and then they can hold down both this mount and the bracket as I have done in the photos.

Also, let me know what you think of it if you print it off! I’ve love to hear feedback.

[Etsy Store](https://www.etsy.com/shop/ManlyResources?ref=shop_sugg_market)

STL File  
[Mount.stl](https://forum.onefinitycnc.com/uploads/short-url/zTKM7mUZQdH7VXSbqd89LnBB0s5.stl) (343.8 KB)

 ![IMG_4979](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/3/531de655cc3ad67c37ec2cd17a4c0ab39de1013b.jpeg)

 ![OnefinityCNCMount](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/9/b9b53a2748090fd31d580b6a2a0782e0072d965c.jpeg)

 ![OnefinityCNCMount2](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/c/0ce97d464c04658bd77a1c6657333c974492885e.jpeg)

 ![IMG_4978](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/6/9/692246934c01f05daffeb00384222a95faa69a9f.jpeg)

---

<div class="post-metadata">

**Author:** ![Sschippel](https://avatars.discourse-cdn.com/v4/letter/s/f17d59/32.png) [@Sschippel](https://forum.onefinitycnc.com/u/Sschippel)\
**Post date:** [May 7, 2024, 10:05pm UTC](https://forum.onefinitycnc.com/t/x-axis-dust-collector-hose-router-cable-mount/26778/2 "2024-05-07T22:05:12Z")

</div>

I like the idea. I have sort of the same issue. I have set up an arm that has a spring attached and it allows the dust collection system hose to move when machine moves. The router cord doesn’t seem to get in the way. I am not aware of how I could place it inside the track due to the plug at the end, so I just made sure there is enough freedom for it to move. Thanks for your idea.

---

<div class="post-metadata">

**Author:** ![HeadlessChicken](https://avatars.discourse-cdn.com/v4/letter/h/97f17d/32.png) [@HeadlessChicken](https://forum.onefinitycnc.com/u/HeadlessChicken)\
**Post date:** [May 8, 2024, 8:09pm UTC](https://forum.onefinitycnc.com/t/x-axis-dust-collector-hose-router-cable-mount/26778/3 "2024-05-08T20:09:38Z")

</div>

Oh interesting. I’m trying to picture it. The arm is holding the hose above the machine?

Yeah no problem! Happy to share 😃
