# X axis loosing accuracy over long distance

**URL:** <https://forum.onefinitycnc.com/t/x-axis-loosing-accuracy-over-long-distance/10200>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [January 9, 2022, 11:25pm UTC](https://forum.onefinitycnc.com/t/x-axis-loosing-accuracy-over-long-distance/10200 "2022-01-09T23:25:24Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![markalanevans](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/markalanevans/32/8212_2.png) [@markalanevans](https://forum.onefinitycnc.com/u/markalanevans)\
**Post date:** [March 19, 2023, 6:50am UTC](https://forum.onefinitycnc.com/t/x-axis-loosing-accuracy-over-long-distance/10200/13 "2023-03-19T06:50:40Z")

</div>

I’ve created a separate post for my specific issue here btw.

> [@X50 Hole Diameter is inconsistent in my Wasteboard](https://forum.onefinitycnc.com/t/x50-hole-diameter-is-inconsistent-in-my-wasteboard/19495):
>
> I’m using Fusion 360 to cut my wasteboard. I designed it to have a bunch of dog holes in them. I just came out to see how the machine was doing and all the holes are cut, but the bench dogs either slide in really nicely, fit snug, or don’t fit. It seems like as the machine moves to the right (x axis) in general, the holes get tighter and tighter. It’s not everyhole, but almost all of them on the right side don’t fit, where as all of them on the left slab fit. As you c…

---

_[View the full topic](https://forum.onefinitycnc.com/t/x-axis-loosing-accuracy-over-long-distance/10200)._