# X box controller

**URL:** <https://forum.onefinitycnc.com/t/x-box-controller/9660>\
**Category:** Uncategorized\
**Created:** [December 19, 2021, 5:42am UTC](https://forum.onefinitycnc.com/t/x-box-controller/9660 "2021-12-19T05:42:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Crossfire](https://avatars.discourse-cdn.com/v4/letter/c/a8b319/32.png) [@Crossfire](https://forum.onefinitycnc.com/u/Crossfire)\
**Post date:** [December 19, 2021, 5:42am UTC](https://forum.onefinitycnc.com/t/x-box-controller/9660/1 "2021-12-19T05:42:08Z")

</div>

Hi brand new to the forum i am a 2 year old user of x-carve from inventables never had any trouble with my machine at all but being a retired machinist i really like the quality of the Onefinity machine my question if i buy the Onefinty machine can i use the x-box controller to run the Onefinity machine with the inventables Easel program it appears that the stepper motors are the same or am i mistaken Thanks for any info Dennis

---

<div class="post-metadata">

**Author:** ![asr75](https://avatars.discourse-cdn.com/v4/letter/a/45deac/32.png) [@asr75](https://forum.onefinitycnc.com/u/asr75)\
**Post date:** [December 19, 2021, 12:37pm UTC](https://forum.onefinitycnc.com/t/x-box-controller/9660/2 "2021-12-19T12:37:19Z")

</div>

You can’t control the Onefinity with Easel as you do with the xcarve. However, You can design and create gcodes files on Easel and then download them and put them in the Onefinity’s controller, and cut them. Inventables and Onefinity are competitors and I don’t think that Inventables is going to let Onefinity use their program to control their machines. In other words, unlike Inventables, Onefinity does not have its own program to design. You need to design and create the gcodes somewhere else. I hope that makes sense!!

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [December 19, 2021, 4:58pm UTC](https://forum.onefinitycnc.com/t/x-box-controller/9660/3 "2021-12-19T16:58:25Z")

</div>

> [@Creating a file in Inventables Easel](https://forum.onefinitycnc.com/t/creating-a-file-in-inventables-easel/1078):
>
> It’s a bit confusing to Onefinity users that use Easel as the CAD program. Onefinity has a ‘smart’ controller. You will NEVER directly connect your computer to the Onefinity controller or need to download any ‘drivers’. Inventables has a ‘dumb’ controller that REQUIRES the computer/easel to be connected to their controller at all times. This requires ‘drivers’ to be downloaded for xcarve users. Onefinity users should NEVER download the drivers as you will not use them. It’s a bit confusing,…
