# X Gantry Spacer Block STL (Official) FAQ

**URL:** <https://forum.onefinitycnc.com/t/x-gantry-spacer-block-stl-official-faq/31724>\
**Category:** Official FAQs\
**Created:** [March 17, 2025, 11:47pm UTC](https://forum.onefinitycnc.com/t/x-gantry-spacer-block-stl-official-faq/31724 "2025-03-17T23:47:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 17, 2025, 11:47pm UTC](https://forum.onefinitycnc.com/t/x-gantry-spacer-block-stl-official-faq/31724/1 "2025-03-17T23:47:58Z")

</div>

This is a STL file for the X gantry spacer block (metal versions of these are included with any rotary purchased for woodworker or journeyman machines).

## STL File

[X Gantry Spacer For Rotary.STL](https://forum.onefinitycnc.com/uploads/short-url/25T5X2KdlqsZEIJLBK2l5CH9ENF.STL) (197.2 KB)

What they do:

 ![GetAttachmentThumbnail](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/b/7b38990a1e08d3389e2a1509cbca510b2f937c1c.jpeg)

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 30, 2025, 7:14pm UTC](https://forum.onefinitycnc.com/t/x-gantry-spacer-block-stl-official-faq/31724/3 "2025-03-30T19:14:39Z")

</div>