# X under limits after probing xyz

**URL:** <https://forum.onefinitycnc.com/t/x-under-limits-after-probing-xyz/19065>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [February 26, 2023, 5:50pm UTC](https://forum.onefinitycnc.com/t/x-under-limits-after-probing-xyz/19065 "2023-02-26T17:50:54Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [February 26, 2023, 10:35pm UTC](https://forum.onefinitycnc.com/t/x-under-limits-after-probing-xyz/19065/3 "2023-02-26T22:35:39Z")

</div>

Hey Dale,

> [@Z-azis position below 0mm](https://forum.onefinitycnc.com/t/z-azis-position-below-0mm/18763/3):
>
> you can safely ignore all limits warnings as long you have not loaded a g-code program of your own.
> 
> Once you will have, and will have probed your workpiece, the limit error either disappears or it will tell you if your g-code program tries to mill outside the machine’s working space.
> 
> See [Help! My Toolpath says ‘Under’ or 'Over"! (with videos)](https://forum.onefinitycnc.com/t/help-my-toolpath-says-under-or-over-with-videos/1982) for details.
> 
> Welcome to the forum!

* * *

---

_[View the full topic](https://forum.onefinitycnc.com/t/x-under-limits-after-probing-xyz/19065)._