# X35 vs x50 Stepper Motors

**URL:** <https://forum.onefinitycnc.com/t/x35-vs-x50-stepper-motors/18011>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [January 11, 2023, 1:41am UTC](https://forum.onefinitycnc.com/t/x35-vs-x50-stepper-motors/18011 "2023-01-11T01:41:25Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [January 11, 2023, 10:35am UTC](https://forum.onefinitycnc.com/t/x35-vs-x50-stepper-motors/18011/2 "2023-01-11T10:35:39Z")

</div>

Hey Craig,

with the upgrade to X-50 (Woodworker 32" or Journeyman 48" X axis), the Y and the Z axes stay the same. For details see here:

- [Differences Between X-50 Rails (upgrade) and X-35 Rails (standard)](https://forum.onefinitycnc.com/t/differences-between-x-50-rails-upgrade-and-x-35-rails-standard/6033)

---

_[View the full topic](https://forum.onefinitycnc.com/t/x35-vs-x50-stepper-motors/18011)._