# X50 Journeyman - original\_Drag Chain suggestions needed

**URL:** <https://forum.onefinitycnc.com/t/x50-journeyman-original-drag-chain-suggestions-needed/25779>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [March 7, 2024, 2:39pm UTC](https://forum.onefinitycnc.com/t/x50-journeyman-original-drag-chain-suggestions-needed/25779 "2024-03-07T14:39:40Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [March 7, 2024, 3:06pm UTC](https://forum.onefinitycnc.com/t/x50-journeyman-original-drag-chain-suggestions-needed/25779/2 "2024-03-07T15:06:53Z")

</div>

Hey Danno,

the clips can lead to [sagging drag chains](https://forum.onefinitycnc.com/t/sagging-drag-chains/22230/1).

> [@Sagging Drag Chains](https://forum.onefinitycnc.com/t/sagging-drag-chains/22230/18):
>
> Here are some pictures of the problem, so it’s super clear what the issue is.
> 
> ![IMG_1626](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/b/9b339e5265bdec0c51e89f252c16b843a4b56c17.jpeg)
> 
> ![IMG_1625](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/9/7929bf03ca767d45a0b1fec3a510610df792c6b7.jpeg)

Better build a custom drag chain that fits your needs.

See also [drag chain width calculation](https://forum.onefinitycnc.com/t/journeyman-x-50-drag-chain-addition/17984/2)

Welcome to the forum!

---

_[View the full topic](https://forum.onefinitycnc.com/t/x50-journeyman-original-drag-chain-suggestions-needed/25779)._