# X50 X limit set to 812?

**URL:** <https://forum.onefinitycnc.com/t/x50-x-limit-set-to-812/17302>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [December 11, 2022, 7:26am UTC](https://forum.onefinitycnc.com/t/x50-x-limit-set-to-812/17302 "2022-12-11T07:26:01Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [December 11, 2022, 6:44pm UTC](https://forum.onefinitycnc.com/t/x50-x-limit-set-to-812/17302/7 "2022-12-11T18:44:05Z")

</div>

Onefinitycnc once posted:

> [@Journeyman Motor 0 Max Soft Limit Discrepancy](https://forum.onefinitycnc.com/t/journeyman-motor-0-max-soft-limit-discrepancy/8801/5):
>
> if we’re splitting hairs, you could do 1222, but, due to tolerances, we suggest 1220.

---

_[View the full topic](https://forum.onefinitycnc.com/t/x50-x-limit-set-to-812/17302)._