# Y axis not synchronised **URL:** \ **Category:** Uncategorized\ **Created:** [May 6, 2023, 10:31am UTC](https://forum.onefinitycnc.com/t/y-axis-not-synchronised/20460 "2023-05-06T10:31:05Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [May 6, 2023, 10:49am UTC](https://forum.onefinitycnc.com/t/y-axis-not-synchronised/20460/2 "2023-05-06T10:49:36Z")
Hey CJ, I would check the points in - [Troubleshooting: Rail is getting hung, stuck, or out of alignment (x35/x50 machines)](https://forum.onefinitycnc.com/t/troubleshooting-rail-is-getting-hung-stuck-or-out-of-alignment-x35-x50-machines/10826) one by one. But if I see it right, the Y carriages try to move into different directions. In this case: > [@Troubleshooting: Rail is getting hung, stuck, or out of alignment (x35/x50 machines)](https://forum.onefinitycnc.com/t/troubleshooting-rail-is-getting-hung-stuck-or-out-of-alignment-x35-x50-machines/10826/1): > > **Note: Any time the axis moves in the opposite direction than what you direct it to, it’s 100% of the time a bad wire/connection. Sometimes, something as simple as disconnecting and reconnecting the wires connection solves it. Follow below for more help and examples.** --- _[View the full topic](https://forum.onefinitycnc.com/t/y-axis-not-synchronised/20460)._