# Y axis won't home

**URL:** <https://forum.onefinitycnc.com/t/y-axis-wont-home/4590>\
**Category:** Uncategorized\
**Created:** [March 25, 2021, 4:32pm UTC](https://forum.onefinitycnc.com/t/y-axis-wont-home/4590 "2021-03-25T16:32:06Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tim](https://avatars.discourse-cdn.com/v4/letter/t/ce73a5/32.png) [@Tim](https://forum.onefinitycnc.com/u/Tim)\
**Post date:** [March 25, 2021, 4:32pm UTC](https://forum.onefinitycnc.com/t/y-axis-wont-home/4590/1 "2021-03-25T16:32:06Z")

</div>

![20210325_092533](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/8/84c7ceb351d7018f3f6a21cb77e4a2e706c66ce5.jpeg)  
Y axis won’t home. I have reset, reconfigured, reinstalled updatesand rebooted still won’t home. It will run out the back end of the rails and threw the front of the rails. I have checked connections compared x homing settings to the y settings.  
Any ideas?

---

<div class="post-metadata">

**Author:** ![Craig](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/craig/32/1344_2.png) [@Craig](https://forum.onefinitycnc.com/u/Craig)\
**Post date:** [March 25, 2021, 4:40pm UTC](https://forum.onefinitycnc.com/t/y-axis-wont-home/4590/2 "2021-03-25T16:40:01Z")

</div>

Have you tried sending an email to [support@onefinitycnc.com](mailto:support@onefinitycnc.com)?

---

<div class="post-metadata">

**Author:** ![Tim](https://avatars.discourse-cdn.com/v4/letter/t/ce73a5/32.png) [@Tim](https://forum.onefinitycnc.com/u/Tim)\
**Post date:** [March 25, 2021, 4:51pm UTC](https://forum.onefinitycnc.com/t/y-axis-wont-home/4590/3 "2021-03-25T16:51:50Z")

</div>

Thats the next step. Hoping someone on here had a simple fix.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 25, 2021, 6:19pm UTC](https://forum.onefinitycnc.com/t/y-axis-wont-home/4590/4 "2021-03-25T18:19:59Z")

</div>

you need to adjust stall homing for the y rail:

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/8/8099de048b2a143065d7e3c10863471e5453a933.jpeg "Adjusting Stall Homing On The Onefinity CNC") ](https://www.youtube.com/watch?v=cIiP5stsNKg)