# Yet another newbie z axis quesion

**URL:** <https://forum.onefinitycnc.com/t/yet-another-newbie-z-axis-quesion/15480>\
**Category:** Uncategorized\
**Created:** [September 25, 2022, 4:01pm UTC](https://forum.onefinitycnc.com/t/yet-another-newbie-z-axis-quesion/15480 "2022-09-25T16:01:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [September 25, 2022, 4:01pm UTC](https://forum.onefinitycnc.com/t/yet-another-newbie-z-axis-quesion/15480/1 "2022-09-25T16:01:23Z")

</div>

yet another newbie question. my z axis says no fit. I fingered it, (literally and figuratively), and it said the following: “toolpath info z axis warning current toolpath dimentions15.875 exceed axis dimensions 5.236 by 10.635” the problem is I have no idea what the heck it is talking about nor how to fix the called dimension it says I am asking for. i have gone through it repeatedly and I cannot find any place where I am asking for 15.875 inches

---

<div class="post-metadata">

**Author:** ![helibuff](https://avatars.discourse-cdn.com/v4/letter/h/f05b48/32.png) [@helibuff](https://forum.onefinitycnc.com/u/helibuff)\
**Post date:** [September 25, 2022, 4:20pm UTC](https://forum.onefinitycnc.com/t/yet-another-newbie-z-axis-quesion/15480/2 "2022-09-25T16:20:23Z")

</div>

Have a look at this video, It will help you understand  
[https://forum.onefinitycnc.com/t/help-my-toolpath-says-under-or-over-with-videos/1982](https://forum.onefinitycnc.com/t/help-my-toolpath-says-under-or-over-with-videos/1982)