# Z-Axis keeps going up when homing

**URL:** <https://forum.onefinitycnc.com/t/z-axis-keeps-going-up-when-homing/25045>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [January 30, 2024, 11:59pm UTC](https://forum.onefinitycnc.com/t/z-axis-keeps-going-up-when-homing/25045 "2024-01-30T23:59:03Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 31, 2024, 12:10am UTC](https://forum.onefinitycnc.com/t/z-axis-keeps-going-up-when-homing/25045/2 "2024-01-31T00:10:45Z")

</div>

> [@How To Adjust Stall Homing (Video) (BB Controllers only)](https://forum.onefinitycnc.com/t/how-to-adjust-stall-homing-video-bb-controllers-only/8529):
>
> (this does not apply to elite machines) You may need to adjust stall homing from time to time during the life of the machine. CLIMATE OF MACHINE: Changes in the environment, seasonal changes, static electricity, expansion and contraction,(cold in the morning, hot in the evening). etc. can have an affect on the stall homing. Expect to adjust this during the change from hot to cold and cold to hot seasons or just a unheated shop in the morning to a heated shop when you work in it. If you are …

---

_[View the full topic](https://forum.onefinitycnc.com/t/z-axis-keeps-going-up-when-homing/25045)._