# Z axis motor/router

**URL:** <https://forum.onefinitycnc.com/t/z-axis-motor-router/2416>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [December 30, 2020, 7:41pm UTC](https://forum.onefinitycnc.com/t/z-axis-motor-router/2416 "2020-12-30T19:41:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![St0mp](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@St0mp](https://forum.onefinitycnc.com/u/St0mp)\
**Post date:** [December 30, 2020, 7:41pm UTC](https://forum.onefinitycnc.com/t/z-axis-motor-router/2416/1 "2020-12-30T19:41:15Z")

</div>

nm i had to make a jig fixed

---

<div class="post-metadata">

**Author:** ![St0mp](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@St0mp](https://forum.onefinitycnc.com/u/St0mp)\
**Post date:** [December 30, 2020, 8:08pm UTC](https://forum.onefinitycnc.com/t/z-axis-motor-router/2416/3 "2020-12-30T20:08:06Z")

</div>

yeah i really wanted to be able to adjust the machine for a True 0 so i know i would never dig into my table top. but i think im going to end up putting a elevator like platform for some thicker stuff anyway.