# Z axis set screws are stripped

**URL:** https://forum.onefinitycnc.com/t/z-axis-set-screws-are-stripped/30714
**Category:** Elite Series (Masso & Redline) (Gen 1)
**Created:** [February 2, 2025, 8:50pm UTC](https://forum.onefinitycnc.com/t/z-axis-set-screws-are-stripped/30714 "2025-02-02T20:50:47Z")
**Posts on this page:** 1
**Showing post:** 14

<div class="post-metadata">

### Author: ![TommyObar](https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/32.png) [@TommyObar](https://forum.onefinitycnc.com/u/TommyObar)
#### Post date: [February 24, 2025, 4:31pm UTC](https://forum.onefinitycnc.com/t/z-axis-set-screws-are-stripped/30714/14 "2025-02-24T16:31:12Z")

</div>

I had issues stripping bolts on other tools too, so finally bought a torque wrench.  
[LEXIVON Bike Torque Wrench 1/4-Inch Dr. 15-Piece Kit | 72-Tooth Gear, Dual-Direction Click Type 2~26 Nm / 17.7~230.1 in-lb (LX-191) - Amazon.com](https://www.amazon.com/dp/B0BH57YJ8Z?tag=benmyers-20)

---

_[View the full topic](https://forum.onefinitycnc.com/t/z-axis-set-screws-are-stripped/30714)._