# Z axis will not home or jog

**URL:** https://forum.onefinitycnc.com/t/z-axis-will-not-home-or-jog/8602
**Category:** Original/PRO Series (Buildbotics) (Gen 1)
**Created:** [October 30, 2021, 4:45pm UTC](https://forum.onefinitycnc.com/t/z-axis-will-not-home-or-jog/8602 "2021-10-30T16:45:39Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Gddeharo](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/gddeharo/32/4917_2.png) [@Gddeharo](https://forum.onefinitycnc.com/u/Gddeharo)
#### Post date: [October 30, 2021, 4:45pm UTC](https://forum.onefinitycnc.com/t/z-axis-will-not-home-or-jog/8602/1 "2021-10-30T16:45:40Z")

</div>

Sitting with my new Journeyman and after installing the Journeyman rail the X axis will not home and gives an error. Note it will not jog left or right with the joypad either. I have included a picture of the error Im getting…

Thank you for trying to help me on this 🤓

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/b/0b83d72307a9ca9a8206e56d1a478826c6162d74.jpeg)