# Z-azis position below 0mm

**URL:** <https://forum.onefinitycnc.com/t/z-azis-position-below-0mm/18763>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [February 12, 2023, 10:55pm UTC](https://forum.onefinitycnc.com/t/z-azis-position-below-0mm/18763 "2023-02-12T22:55:07Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [February 25, 2023, 10:03pm UTC](https://forum.onefinitycnc.com/t/z-azis-position-below-0mm/18763/3 "2023-02-25T22:03:36Z")

</div>

Hey Dale,

you can safely ignore all limits warnings as long you have not loaded a g-code program of your own.

Once you will have, and will have probed your workpiece, the limit error either disappears or it will tell you if your g-code program tries to mill outside the machine’s working space.

See [Help! My Toolpath says 'Under' or 'Over"! (with videos)](https://forum.onefinitycnc.com/t/help-my-toolpath-says-under-or-over-with-videos/1982) for details.

Welcome to the forum!

---

_[View the full topic](https://forum.onefinitycnc.com/t/z-azis-position-below-0mm/18763)._