# Z-Stepper with Brake as an option

**URL:** <https://forum.onefinitycnc.com/t/z-stepper-with-brake-as-an-option/23684>\
**Category:** Uncategorized\
**Created:** [November 28, 2023, 9:55pm UTC](https://forum.onefinitycnc.com/t/z-stepper-with-brake-as-an-option/23684 "2023-11-28T21:55:30Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![MKrupp](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@MKrupp](https://forum.onefinitycnc.com/u/MKrupp)\
**Post date:** [November 28, 2023, 9:55pm UTC](https://forum.onefinitycnc.com/t/z-stepper-with-brake-as-an-option/23684/1 "2023-11-28T21:55:31Z")

</div>

It would be nice to have the new stepper with a brake as an option when upgrading from a Z-50 machine to an Elite.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 28, 2023, 9:57pm UTC](https://forum.onefinitycnc.com/t/z-stepper-with-brake-as-an-option/23684/2 "2023-11-28T21:57:01Z")

</div>

already exists, announced today. Order here: [https://www.onefinitycnc.com/product-page/elite-z-20-anti-drop-closed-loop-stepper-motor](https://www.onefinitycnc.com/product-page/elite-z-20-anti-drop-closed-loop-stepper-motor)

---

<div class="post-metadata">

**Author:** ![MKrupp](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@MKrupp](https://forum.onefinitycnc.com/u/MKrupp)\
**Post date:** [November 28, 2023, 11:00pm UTC](https://forum.onefinitycnc.com/t/z-stepper-with-brake-as-an-option/23684/3 "2023-11-28T23:00:04Z")

</div>

So if I order the $1,875 Elite upgrade it will come with the new stepper (with the brake)?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 28, 2023, 11:10pm UTC](https://forum.onefinitycnc.com/t/z-stepper-with-brake-as-an-option/23684/4 "2023-11-28T23:10:54Z")

</div>

No. It’s an add on item.

---

<div class="post-metadata">

**Author:** ![Runnergunner1221](https://avatars.discourse-cdn.com/v4/letter/r/34f0e0/32.png) [@Runnergunner1221](https://forum.onefinitycnc.com/u/Runnergunner1221)\
**Post date:** [April 13, 2024, 8:33pm UTC](https://forum.onefinitycnc.com/t/z-stepper-with-brake-as-an-option/23684/5 "2024-04-13T20:33:02Z")

</div>

It should, especially if ordering the upgrade with the 80mm, at least offer it at a discount.