# Zero Back-Off Speed When Homing

**URL:** <https://forum.onefinitycnc.com/t/zero-back-off-speed-when-homing/27372>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [June 7, 2024, 3:03am UTC](https://forum.onefinitycnc.com/t/zero-back-off-speed-when-homing/27372 "2024-06-07T03:03:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Strat584](https://avatars.discourse-cdn.com/v4/letter/s/919ad9/32.png) [@Strat584](https://forum.onefinitycnc.com/u/Strat584)\
**Post date:** [June 7, 2024, 3:03am UTC](https://forum.onefinitycnc.com/t/zero-back-off-speed-when-homing/27372/1 "2024-06-07T03:03:47Z")

</div>

I just upgraded to 1.3.1 from 1.0.9. One thing I liked about the upgrade was that when I was homing my machine, it slowly backed off each axis. Now after starting the machine up again today, it is back to how it used to be in 1.0.9, quickly jerking back to the home position. Not sure if I did something to change it but could someone help me understand what is happening and how I can get it back to the slow back-off speed when homing?

---

<div class="post-metadata">

**Author:** ![Strat584](https://avatars.discourse-cdn.com/v4/letter/s/919ad9/32.png) [@Strat584](https://forum.onefinitycnc.com/u/Strat584)\
**Post date:** [August 23, 2024, 11:54pm UTC](https://forum.onefinitycnc.com/t/zero-back-off-speed-when-homing/27372/2 "2024-08-23T23:54:16Z")

</div>

Still hoping someone can help me with this.