Hey Todd,
workpiece coolant is a standard on cnc machines. You can attach different systems to your machine(s). See them at your favorite CNC parts suppliers, e.g.:
Workpiece coolant is controlled by the standard g-code commands:
-
M7 - turn mist coolant on.
M8 - turn flood coolant on.
M9 - turn both M7 and M8 off.
(Official RS-274 NGC G-code. Note that these commands can also be used for other purposes) depending on what you attach to the M7 / M8 control ports (“Load-1” and “Load-2” pins of 25-pin I/O port on buildbotics.com, e.g. vacuum control)