I am new with 1F but have had a Shark 4 for a few years. After homing the machine I load the file (simple grid) and I get the Y is over and the X is under the soft limits. I don’t know what to do.

[image] Help! My Toolpath says 'Under' or 'Over" (BB controllers) OR 'Soft Alarm on AXIS" (Masso controllers)! (with videos) Over / Under / Soft Alarm <a name="p-6444-while-this-faq-was-originally-wrote-for-the-non-elite-machines-the-same-principal-applies-to-both-overunder-on-non-elite-controllers-and-soft-alarm-on-elite-controllers-mean-the-same-thing-so-the-below-principals-apply-to-all-machines-1" class="anchor" href="#p-6444-while-this-faq-was-originally-wrote-for-the-non-elite-machines-the-same-principal-applies-to-both-overunder-on-non-elite-controllers-and-soft-alarm-on-elite-controllers-mean-the-same-thing-so-the-below-principals-apply-to-all-machines-1"> While this FAQ was originally wrote for the Non-Elite Machines, the same principal applies to both. Over/unde…

I should give you more information, after homing I load the file and then probe XYZ, it’s then I receive errors regarding the X & Y soft limits being greater or lesser than 0.00mm and the file won’t run. This happens everytime I have tried to run a file.

Are you receiving the error when attempting to probe or after probing has completed?

Hey Stan, [image] Natick64: I am new with 1F but have had a Shark 4 for a few years. After homing the machine I load the file (simple grid) and I get the Y is over and the X is under the soft limits. I don’t know what to do. [image] Natick64: I should give you more information, after hom…

Errors after probing

Original/PRO Series (Buildbotics) (Gen 1) Troubleshooting (X35/X50)

OnefinityCNC (Onefinity CNC Official ✅) February 23, 2024, 8:20pm 2

Topic		Replies	Views
X axis less than soft limit Original/PRO Series (Buildbotics) (Gen 1)	3	296	April 30, 2024
'Error keeps popping up Troubleshooting (X35/X50)	5	953	May 7, 2023
Error: Y axis position -0.254mm is less than minimum soft limit Troubleshooting (X35/X50)	2	1344	April 29, 2022
Zeroing error messages Original/PRO Series (Buildbotics) (Gen 1)	1	402	June 8, 2023
Error with xy position Troubleshooting (X35/X50)	1	114	September 23, 2024

Errors after probing

Related topics