So after receiving my machine, setting everything up today I wanted to surface the spoilboard. Opened carveco maker and continued to make a surfacing tool path. It was suppose to only take of 1/10 of an inch per pass. After probing xyz it started off center and it took off .20 inches on the fir…

Name: Flattening A Wasteboard On the Onefinity CNC
Uploaded: 2023-04-22T22:43:15Z
Description: [Flattening A Wasteboard On the Onefinity CNC] Here is the Onefinity surfacing video

Just wanted to let everyone know that after installing new spoilboard and getting a new router i used the masso conversational programing wizard. Used the rectangle pocket wizard and it worked really well. I read on another page about removing the router cord out of the wire chain thingy so I did …

When surfacing my spoilboard I don’t probe X or Y only Z. My spoilboard program on the Journeyman covers the complete 1220mm X and 816 Y and so it starts from machine home. Need to probe the Z to set the highest point of the work area surface though. Not sure what model you have but the surfacing p…

Oh, just realized why it looks small you said your program starts from the center. Mine cuts the perimeter then rasters from front to back.

[Flattening A Wasteboard On the Onefinity CNC] Here is the Onefinity surfacing video

Hey Dan, [image] DaddyDan: today I wanted to surface the spoilboard. Opened carveco maker and continued to make a surfacing tool path. depends on what your g-code is programmed to do. If you share it, forum members could have a look at it. [image] DaddyDan: After probing xyz it started …

I have the elite journeyman. I will try just probing for z Thank you

Thanks I will look at it after I replace my spoil board.

I will try to post the tool path and hopefully someone can figure it out. I will take a look at the trouble shooting after I get new spoilboards on YOU GUYS ARE AMAZING THANK YOU FOR THE ADVICE AND VOTES OF CONFIDENCE!!! Thanks again!!!

Aiph5u, Sorry about the response, it was bed time and I wanted to acknowledge your response but I will attempt to better answer your questions: I will post the files today so you and the group can look at them. It is funny I had issue with using the Onefinity.ngc file on carveco and ended up usin…

Spoilboard 2 Inch Grid.nc (8.0 KB) Here are the files Spoilboard Surfacing.nc (4.0 KB)

Man do i feel your pain. Had similar cheering and boing session the other day with my spoil board. I got nothing for you but a fellow newbie to commiserate with.

Holy Gee Whiz WTF!

Elite Series (Masso & Redline) (Gen 1)

Enginerd (Chris) April 22, 2023, 10:43pm 4

Here is the Onefinity surfacing video

Technically my 2nd Project on Elite Foreman

Topic		Replies	Views
Was soo excited, then this Troubleshooting (X35/X50)	54	4322	June 4, 2022
How do you ensure your model translates to reality? Troubleshooting (X35/X50)	27	1991	August 13, 2022
Production run went horribly wrong after being fine Troubleshooting (X35/X50)	23	2357	August 1, 2022
Touch Probe X Not Working Correctly with Surfacing Bit (solved, cannot probe a surfacing bit ) Touch Probe	21	3003	January 31, 2023
Z slider mounting position Uncategorized	26	122	March 15, 2026

Holy Gee Whiz WTF!

Related topics