Just curious...Elite Woodworker

[OnefinityCNC (Onefinity Support)]

The stiffy is optional on all machines. You can add that on at anytime!

What does Onefinity recommend to purchase?

We get many questions asking what we recommend in terms of machine, wasteboard, bits, router, software, monitor etc. We’ll try to answer that in this FAQ. There are more advanced answers (and workarounds) to some of these points, but this is the easiest, general, beginner friendly, answers we can give. Machine (required) Let’s start with the machine. We’d always recommended getting the largest one you can fit. You can always cut smaller pieces on a larger machine, but (generally) you cannot…