Is anyone in the Pittsburgh are willing to help me via phone or in person? I have the elite foreman, with Masso control. I am trying to resurface my spoil board, either the machine shuts off with alarm on the Z or the program starts, and then shuts down mysteriously. I am new ti CNC and any help would be appreciated. Joe

well maybe you can help i am trying to surface spoil board here is what is going on i have all x,y,and z all set dead center i tryed to use prob first all i cut is air then i did the paper trick again cutting air so is it me [Aiph5u] | Aiph5u Aiph5u (not affiliated with Onefinity) March 6 | | - | Hey Joseph, [image]zepposhack23: are willing to help me via phone or in person? So you don’t want help from the forum members via the forum? Many faced problems like yours when they were new with their machine.

Hey Joseph, [image] zepposhack23: either the machine shuts off with alarm on the Z or the program starts, and then shuts down mysteriously. [image] zepposhack23: well maybe you can help i am trying to surface spoil board here is what is going on i have all x,y,and z all set dead center i tryed to use prob first all i cut is air then i did the paper trick again cutting air so is it me I have no experience with the Masso (so others may help you better than I can) but I know that the Masso has a function to surface the wasteboard, are you using it? It is → described here. If you don’t use this function, but use a toolpath that you created with a CAM software, so if you want to machine the entire wasteboard, this means you go to the limits of the machine, so setting the zero point (either by probing, or by setting manually) on the workpiece is of crucial importance. If you set it only a millimeter away from the correct position you might have your toolpath shifted beyond the limits of the machine’s workarea, which would lead to a limits error. The other thing is with Z. You say you are milling air. In order to use the paper method or to probe on top of the wasteboard, you must have your workpiece zero in your virtual 3D model on the top of the workpiece too. Remember, the coordinate you probe or set manually on the real workpiece has to be exactly where it is on your virtual 3D model’s zero coordinate. Finally, if the machine “shuts off with alarm on the Z” or “shuts down mysteriously”, then this could be something to report to support@onefinitycnc.com Got to go to bed now (past midnight in Central Europe), surely Masso users will further help you

Hey thank you very much it still did not fix problem but it calmed me down [Aiph5u] | Aiph5u Aiph5u (not affiliated with Onefinity) March 6 | | - | Hey Joseph, [image]zepposhack23: either the machine shuts off with alarm on the Z or the program starts, and then shuts down mysteriously. [image]zepposhack23: well maybe you can help i am trying to surface spoil board here is what is going on i have all x,y,and z all set dead center i tryed to use prob first all i cut is air then i did the paper trick again cutting air so is it me I have no experience with the Masso (so others may help you better than I can) but I know that the Masso has a function to surface the wasteboard, are you using it? It is → described here. If you don’t use this function, but use a toolpath that you created with a CAM software, so if you want to machine the entire wasteboard, this means you go to the limits of the machine, so setting the zero point (either by probing, or by setting manually) on the workpiece is of crucial importance. If you set it only a millimeter away from the correct position you might have your toolpath shifted beyond the limits of the machine’s workarea, which would lead to a limits error. The other thing is with Z. You say you are milling air. In order to use the paper method or to probe on top of the wasteboard, you must have your workpiece zero in your virtual 3D model on the top of the workpiece too. Remember, the coordinate you probe or set manually on the real workpiece has to be exactly where it is on your virtual 3D model’s zero coordinate. Finally, if the machine “shuts off with alarm on the Z” or “shuts down mysteriously”, then this could be something to report to support@onefinitycnc.com

Masso Spoilboard Surfacing, Errors / Help in the pittsburgh area

Elite Series (Masso & Redline) (Gen 1) Troubleshooting (Elite Series)

349iq2345 March 6, 2024, 12:13pm 2

Hey Joseph,

So you don’t want help from the forum members via the forum? Many faced problems like yours when they were new with their machine.

Topic		Replies	Views
Masso Can Surface Your spoilboard! (Built in Routine/Wizard) Elite Series (Masso & Redline) (Gen 1)	21	5049	February 22, 2024
Surfacing - Soft alarm Elite Series (Masso & Redline) (Gen 1)	2	238	October 24, 2024
Soft alarm on Y-axis Elite Series (Masso & Redline) (Gen 1)	1	274	September 25, 2024
Foreman Spoilboard Surfacing with MASSO Wizard Elite Series (Masso & Redline) (Gen 1)	6	803	April 4, 2024
Surfacing error Elite Series (Masso & Redline) (Gen 1)	2	253	March 9, 2024

Masso Spoilboard Surfacing, Errors / Help in the pittsburgh area

Related topics