Hi all, I hope you’re doing well. Has anyone had any issues with inaccurate feed rates when running G code posted from Fusion 360? For context, I just upgraded to a Journeyman X50 and a water cooled spindle from a Shapeoko 3 XXL with the HDZ and Makita router. My main reason for upgrading was reliab…

Search the forum for max jerk and max acceleration settings. You need to use your judgment when tuning them as your mileage may vary depending what you do. The machine can run much tighter and faster than it does with default settings but… With great power… Comes great responsibility…

Yeah your motor settings could the factor here. I use Fusion as well (paid version) and I have no issues with unusually long machining times. On my journeyman I use the stock 1F controller and on my Machinist model I use the Centroid Acorn and run times are good on both. Can you upload a photo of yo…

I use the free version of Fusion and find it can do funny things. Once it decided to cut in multiple depths and the machine time should have been something like 20 minutes turn into 4 hours. The weird thing was I was just doing a simple pocket and was experimenting with how much material to leave.…

Critical point. If you open up your gcode, you will see, (WHEN USING FUSION 360 FOR PERSONAL USE, THE FEEDRATE OF) (RAPID MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING) (MOVES, WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID) (MOVES ARE AVAILABLE WITH A FUSION 360 SUBSCRIPTION.) After t…

Curtis - when Autodesk changed the license configuration and removed rapids, they did nothing to change the estimated completion time. The estimate includes rapids, which the free version does not export. Example, I did a series of bore operations recently that was estimated at 25 seconds, and it t…

Hi everyone, thank you for your responses. I’m sorry for being so late with my reply, I was feeling pretty overwhelmed with trying to get my holiday products out the door, I read everything and completely forgot to respond. I figured I would upload the solution just in case anyone else has this prob…

Feed Rate Issues With G Code generated in Fusion 360

Original/PRO Series (Buildbotics) (Gen 1) Troubleshooting (X35/X50)

ConvenientWoodwork (Nick) November 21, 2021, 3:39pm 3

Another thing to keep in mind is that with the free version of Fusion 360 you don’t get full rapids

1 Like

Topic		Replies	Views
CAM Considerations for more efficient carving? (Fusion3600 Fusion 360	6	962	November 27, 2021
Feedrate much lower than expected Fusion 360	3	905	March 8, 2022
Fusion 360 feed rate reduced Original/PRO Series (Buildbotics) (Gen 1)	13	2944	February 8, 2022
Looking for some fusion machine time help Fusion 360	2	93	December 12, 2025
Machine Library in the Manufacture workspace of Fusion 360	2	586	January 4, 2023

Feed Rate Issues With G Code generated in Fusion 360

Related topics