Hi, I’m searching a solution about a prob while exporting gCode export from Vectric. When I’m exporting several toolpath using the same bit they’re merged into the same .ngc file and it’s fine but when I run the file on my journeyman I get a msg on the display before to run the new toolpath, it co…

I do not recall ever seeing this behavior when combining multiple tool paths with the same bit. Are you sure you have not inadvertently assigned different tool numbers in the settings for each path?

Stefano, I get the same thing when I group tool paths in the same file. Fortunately, the spindle never slows down and I am able to just press continue. It is a minor annoyance, probably coded into the post processor by design.

Thx for your suggestion !! I’ve checked it → I’ve applied the same tool Nb for the 4 toolpath, only adapted some parameter like pass depth, stepover or feed rate. Into the gCode, the tool Nb is mentioonned only once at the begining. When exporting the gCode I use option : Visible toolpath to one f…

Will you post your Vcarve project and gcode so we can see them? I have run several tests. The only way I have found to recreate this behavior on my end is to assign a different tool number to one of the paths. But I would be interested to see your files in more detail to see if something else is at…

Here are both files : crv3d plus the ngc with 4 path Template_contour ext.crv3d (288.5 KB) all path.ngc (18.5 KB) I’ve found this … that might help. But as beginnier I won’t implement it without any confirmation Exporting with another post processor (Mach 2/3 ATC arcs) no lines with M0 MSG, t…

Unfortunately, I can’t open the .crv3d file. I had incorrectly assumed you were using VCarve, not Aspire. However, it’s worth noting that the gcode intro is different, so it may be a post processor issue specific to Aspire, as there are clearly differences. Are you using the Onefinity post processo…

I got the post pro posted by oneFInity from here : [image] Vectric Post Processors For 10.5 or older versions (Download Links Included) Post Processors (Official) 7/21/2021: Vectric V11 is out now. The Onefinity machines and post processors are now included in the softw…

Interesting. I have confirmed that the NEW_SEGMENT block is removed from the current Vectric-supplied Onefinity post processor. That seems to be the culprit. But removing it means all instances of that tool would run at the same spindle speed as the change is never sent, something I had actually alr…

Hey Stefano, I don’t know if your Aspire has an option activated that tells it to insert the spindle wait to speed message, but at least to remove it in the g-code program is easy if you have sed installed: sed -i "s/M0(MSG, Click 'Continue' when the spindle is up to speed)//g" all\ path.ngc I ch…

Hey Stefano, [image] Stefano: Checking the oneFinity post processor in notePad, I’ve seen this block with an interesting clue ±-------------------------------------------------- * Commands output for a new segment - toolpath * with same toolnumber but maybe different feedrates ±-------------…

M0 MSG while export gCode from Vectric

CAD (Design) Software Vectric

Matticustard July 29, 2022, 4:57pm 18

No, I got it from inside the VCarve software. But you may not have them on an older version.

Machine > Post-processor Management

Topic		Replies	Views
The pause i don't want Vectric	16	370	October 17, 2025
Post GCode without M0 between toolpaths on VCarve Vectric	4	787	January 29, 2022
2 tool paths (same bit) in one file Original/PRO Series (Buildbotics) (Gen 1)	14	1412	September 10, 2023
V2 Vectric Post Processor in Vectric 11 Post Processors (Official)	19	3966	April 25, 2024
Vectric Aspire Tool Change M6 Original/PRO Series (Buildbotics) (Gen 1)	7	2542	February 10, 2021

M0 MSG while export gCode from Vectric

Related topics