It has been a while since I have posted an update to my Masso G3 enclosure build and 1F CNC modifications, but I now have something to share that may interest others. With respect to the electronics, I have made my homing sensor cables, and added a relay module which at the moment uses the ES (Esto…

If you are talking about homing the A axis as part of a Masso build, I believe they recommend all axes have a homing sensor. It was inexpensive compared to others I researched, and easy to wire and set up. I just 3D printed the mount and trigger arm once I knew how the mechanics went together. You n…

I am so ready to make the purchases my only delay sir is I am afraid that I do not fully understand how to hook this up having the CNC machine operate as it does the one finity and also have a rotary attachment which I own I want that very much that was my original plan and still is it looks like yo…

I am always happy to help out. Perhaps breaking it down into steps/parts is best. Is your main goal to add a rotary A axis? If yes, is it a vertical application like mine for a tangential knife? If you want this type of knife you could try a drag knife first. There are many forum members using th…

My goal is to use rotary like pictured in the picture that looks like a lathe how can I do this using current 1f if that Is possible without buying new controller cool

The good news is that it has already been done and proven to work by at least one member of this forum. I believe they used it for engraving a bottle as it turned on the rotary axis. It requires the disconnection/disabling of one of the axes, the Y I believe as only Z and X axis motion is needed alo…

[image] TMToronto: Or, hopefully others who remember that member’s work will help out if they happen upon our discussion 4th axis option

Yeah Rodger has done it I have done it also It works only with Engraving with the laser with the jtech laser but as far as carving with a bit and the Z axis moving an X axis moving could not figure out how to change the coding as far as I know no one has done that yet [Message_1626128877328]

[image] Worth the Price? / Rotary Axis Setup J Tech Laser Roger, I’d really like to see how you set the rotary up, especially the controller changes needed. It was in this post towards the bottom that talks about that setup.

This is what I got from roger Onefinity Laser ROTARY (MM) .pp (5.0 KB) Processing: Rotary Setup for Onefinity.docx… Processing: Rotary Setup for Onefinity.docx…

I would be surprised if you couldn’t edit the post processor for vcarve and use it with the rotary. I mean they are wrapping the Y axis in their PP for the demon controller just like I did for the laser. So I would think you would be able to do some tinkering with the PP for vcarve to get it to work…

Masso G3 build - Tangential knife success with Sheetcam

Aftermarket Controllers (Advanced Users Only)

CommunityUser5 September 18, 2021, 10:42pm 23

4th axis option

2 Likes

Topic		Replies	Views
Rotary on Elite Onefinity Rotary 4th Axis 'The Revolution'	167	7883	November 20, 2024
Elite Series Rotary Suggestion from Onefinity - The Official Onefinity 4th Axis Rotary - The Revolution Onefinity Rotary 4th Axis 'The Revolution'	27	6514	October 22, 2024
4th axis option Feature Requests	33	11546	November 20, 2024
Worth the Price? / Rotary Axis Setup J Tech Laser	82	10506	April 29, 2024
Is there a reason not to go Masso Original/PRO Series (Buildbotics) (Gen 1)	53	2752	July 20, 2024

Masso G3 build - Tangential knife success with Sheetcam

Related topics