Milling VERY THIN aluminum .025"

[Aiph5u ((not affiliated with Onefinity))]

Hey Christy,

found this interesting:

Engraving Anodized Aluminum Tags

One of my first projects with my OneFinity was to engrave plant ID tags for our home garden. I knew I wanted to used anodized aluminum as the tag material, but wasn’t sure how I was going to secure them to the CNC table for engraving. I considered various options, including creating a vacuum table, but finally decided to try a much simpler approach. After measuring several of the tags to check for variations in sizing, I used the CNC to route nine recesses in a piece of MDF slightly deeper th…

@JoeT