10/7/24
1.4.2
Update file. Download Here: 1.4.2 Update
1.4.2 Release Notes
Features:
- NEW: Added text to the play, stop, load, ect buttons for clarification as many didn’t understand the difference between the upload FOLDER button (which only sees folders with gcode in them and will not show gcode) and upload FILE button (which only sees gcode, not folders).
Use the FOLDER button to upload a folder that has a bunch of gcode files in it.
Use the FILE button to upload a single gcode file at a time.
How To Install:
-
Updating via WiFi
Wifi:
If your controller is connected to your home internet, the controller will automatically find the update. At the top center of the screen the words: upgrade to 1.4.0 underlined in blue. Click that. Click update via web button and let the system do it’s thing. -
Updating via USB
You’ll do an update via USB using the following steps:
After downloading, DO NOT UNZIP THE FILE!!!
Copy the blue .bz2 file above onto a usb stick (it must be formatted as fat 32 or ntsf). Click the flyout menu (three bars on top left), general, under firmware click ‘UPLOAD’. Select the 1.3 file.
If you are on firmware 1.0.8 or lower, it may ask for a password.
the password to update will either be buildbotics or onefinity