Onefinity Controller Stopping Mid-Program (solved: EMI / Static Build up)

[Aiph5u (Aiph5u (not affiliated with Onefinity))]

Hey John,

@TheyCallMeJohn

I thought about drilling a hole thru the bottom my table as it is only a temporary table but I am not confident in my drill stops and I am concerned I would plunge it into the bolt making the problem worse.

May I recommend you these ingenious Star-M Depth stops :

The plastic cap rotates freely and stops rotating when you reach desired depth. I use a set of them, from 3 mm (=approx. 1/8″) drill diameter upwards. Picture shows ⌀ 15 mm drill (=approx 19/32″).

Available here or here