Some observations and needed walk throughs (for me anyway) for the next firmware release/how to use video/manual: How do I program the macros and use the offsets? (since it appears I cannot program them through a text file as of now). Identified Here Is there a way to observe the current feed rate…

[image] BarkingBladeDesignCo: How do I program the macros and use the offsets? (since it appears I cannot program them through a text file as of now). Identified Here Any gcode file on the controller can be assigned as a macro. You can assign them using the “Edit” button on the macro tab. T…

RTCNC, Thanks for the pointers! Definitely going to have to play with those recommendations to see if I’m able to do all those. This is the first time I’ve had an actual controller. Is there any reading material or videos that are planned for release sometime soon? I think I figured out the offest.…

[image] BarkingBladeDesignCo: Is there any reading material or videos that are planned for release sometime soon? Yes. We are working on the manual for the RTCNC controller right now. It will be available first on our website and then the plan is to integrate it into the software. OneFinit…

Y’all are awesome! Thanks for straightening me out. I DID find that WPOS button yesterday lol.

[image] BarkingBladeDesignCo: Has there been any other reports of the controller going black for a few seconds during a carve, then back on? I planed my spoil board and it did this a few times. When it said “Program Complete",” I was unable to click the OK button, and had to restart the whole co…

[image] RTCNC: Let me check with Redline and OneFinity to see if they have specific recommendations. Otherwise, I can provide some guidance. Back to you shortly. Any update? With these machines now in the wild and getting setup it is a problem that is looking for a solution (mine is to discon…

It’s in the FAQ section. [image] Redline Controller Grounding FAQ Official 1F Elite (REDLINE) FAQs category Redline Grounding instructions v3.pdf (2.8 MB) [Redline Grounding instructions v3_page-0001] [Redline Grounding instructions v3_page-0002] [Redline G…

Thank you. I hadn’t seen an update in this topic so wasn’t aware you answered it elsewhere.

@JimHatch We are also building out our documentation. Here is an article on static and grounding from the RTCNC manual: Static & Grounding - RealTime CNC Documenation Hub

Thanks. OF did a pretty good write-up on how to set it up with antistatic provisions and where/what to bond with the machine to stop static issues. I got an antistatic hose from Rockler but haven’t done any further MDF surfacing so I’m not sure if my static issues have been solved. But surfacing a 4…

Redline Controller Observations/Questions/Bugs

Elite Series (Masso & Redline) (Gen 1) Controller (Redline) Discussion

OnefinityCNC (Onefinity CNC Official ✅) November 11, 2025, 6:27pm 9

It’s in the FAQ section.

Topic		Replies	Views
Before you buy the redline Controller (Redline) Discussion	10	437	March 30, 2026
Power outages during operation Controller (Buildbotics) Discussion	14	3365	March 12, 2023
Keeping zero position Original/PRO Series (Buildbotics) (Gen 1)	94	9699	February 2, 2024
RealTime Redline Controller Firmware 1.2.2 (12/2025) (Outdated) Outdated Firmware	16	546	March 1, 2026
Redline Home Position Controller (Redline) Discussion	5	230	November 5, 2025

Redline Controller Observations/Questions/Bugs

Related topics