Does anyone have a post processor that works with the Revolution and Fusion 360. I use fusion for all my design work and don’t want to switch to a new software. 3 Axis machining is working fine with the elite masso post processor, but no luck with 4axis yet. I don’t mind editing the code, but see no…

I have the multi-axis extension. However, I’m getting errors with the post processor trying to create the G-Code. Everything Fusion is telling me is that there is a problem with the post processsor file itself. I’ve had some success rewriting the PP, ie, I’m getting it to process and post, but it’s …

It sounds like you are bringing a fair bit of experience to this already but have you tried Autodesk forum support for this? I have found the regular community members extremely helpful and quick to respond.

Not yet. I’m starting here and working my way from there. Since the machine is the common denominator, it seems the best place to start to me. I’ll look into the other forum as well. However, since the Onefinity is a niche market and not an industrial machine, this seems like the most likely source …

I use the PP generously produced by @blaghislain . [image] GitHub - blaghislain/onefinity-post-processors Contribute to blaghislain/onefinity-post-processors development by creating an account on GitHub.

I just received my 4th axis add-on for an Original Series Woodworker. I am a long time Fusion user and I am looking for a good post processor. What is your experience with the blaghislain processor? I would like to run true 4-axis paths…not just index and mill.

I ended up just using a generic grbl post processor. Couldn’t get anything to work that was designed for the onefinity

You were able to get it to work? I tried the one included with the fusion library, but I keep getting the following error… Actually, I have get the same error using the Fusion Buildbotics 4-axis post processor. [image]

Eventually, but I’m travelling at the moment. I’ll have to reference my library and get back to you.

I am just getting into this process now for my new Onefinity. I’ve done it before on an OpenBuilds machine. I think you need to make a machine config to add the A axis to the kinematics. Make sure to turn off TCP as well. I have not tested this yet, so be careful if you do. Maybe run it with the 4t…

That kinematics layout worked well for me. I ran into a few other issues that might be worth noting: I am getting a weird line down my part, but I think the probe X-axis on my rotary is wrong by about 1.5mm. Cutting a hole from both sides of the stock shows a clear misalignment. I was able to fix …

Rotary Post Processor Fusion 360

CAD (Design) Software Fusion 360

OnefinityCNC (Onefinity CNC Official ✅) April 11, 2026, 6:13pm 23

Topic		Replies	Views
Turning toolpath Fusion 360 Fusion 360	3	386	February 22, 2024
4th Axis Rotary Carveco Post Processors (FAQ) Official FAQs	0	244	May 9, 2025
Fusion 360 Post Process file for OneFinity Fusion 360	23	6854	September 8, 2021
Fusion 360 Post Processor for BB Buildbotics (Download Links Included) Post Processors (Official)	71	24574	December 3, 2025
4th axis post processor for masso on maker Uncategorized	1	213	May 11, 2025

Rotary Post Processor Fusion 360

Related topics