I have both of these but have not installed yet. I am trying to understand how they work, in software. What GCode tells the machine that a new tool is needed (T + M06??)? In response to that without an ATC the machine pauses and waits for me to change the endmill? and when I “continue” it naviga…

Well, that worked. You see above, I tried a bunch of variations; but the one variation I hadn’t tried: T1 M6 on separate lines. I got to see the tool setter flow for the first time. Even without the ATC, this is a step forward. I think I probably need to fully understand how this system works w…

I have Elite Gen1 with Redline and Toolsetter and it works similarly as you described: It sees the toolchange command in GCode, it shows a popup that toolchange is needed, and the spindle will rapidly move to the predefined toolchange position. You’ve to confirm it. After hitting OK it moves to to…

As far as the M0 code goes the Redline controller does not support a M0 command yet. The supported G codes are found here at the Redline website. G-Codes - Supported Codes - RealTime CNC Documenation Hub Also you can find the redline controller manual at the …

I think that may be enough info to give me the confidence to take the next steps to install the ATC and Toolsetter. Thanks for the help.

Does the tool get uninstalled from the spindle on power off? Does the controller assume the spindle has no tool installed upon power on? Does it prompt the user to confirm this? If the spindle has a tool installed, does the controller ask the user which tool is installed into the spindle? If I have…

I found this - very long video - helpful. It answered many of my questions. [Installing the Rapid Change Easy ATC on Onefinity Elite Masso]

I just realized, the above video is the one referenced from the Onefinity Support ATC Videos. But the link on the Onefinity site is a facebook redirect (and I don’t have/use facebook): <a href="https://www.facebook.com/flx/warn/?u=https%3A%2F%2Fyoutu.be%2FtI4mUtKQLk4%3Ffbclid%3DIwZXh0bgNhZW0CMTEAYnJpZBExTWVFUEd3M0hKZE95dUxpbQEeKQkugXSr8kBtVuctYiu2HRpKL8JIsWwJgl-w-SQP2HAaVjeYGiZEJNkn92s_aem_hY5X9Y0qTD3n8Aw17XuL7g&h=AT2-OYpDd7t57lG0JXvVnHUe2DohIymF-VsTxChXsZlv7cdXFCPlQilaC3Lfr0C-GBdWQxKGoctvNaM_c3ZFedaufy38KklrDHQ-AcWwh0GqmLs-SHmH0Pm2XeTT5owgeVwarMg-IfFERnKXSzmCLjk2CP147cJFDpLHRKbRMRv83jCh8586wsYS8QP-aRHrw8HJ9M4dVicOhq4cWaF9Uo4PIlyGokb4AkloqEfTfKkjvlt7C8YFeVrhG8F-7vUrafj_sGLQTnr7eQtw2NJ3o48x0aAayfWWieRUFMZFMfgNeg" target="_blank" rel="noopener nofollow ugc">Leaving Facebook Is there a Redline step by step for installing? I’m sure …

The Redline settings has an option to treat an M6 as manual tool change. It is supposed to move the spindle to the configured location, and allow me to manually change the endmill. It requires the toolsetter to be configured. I have done this; but when I run the GCode is stops at the line with the M…

What version of code are you running on your Redline Controller? I had this working before I upgraded to 1.3.10 with the Fusion 360 post processor. After the upgrade I have the same behavior you are seeing. Once it gets to the M6 in the gcode it just hangs. For reference here is the gcode from the…

@UltraPeepi can you again confirm what CAD/CAM you are using and which PP.

I’m using FabexCNC (formerly BlenderCAM). I expect to have to hand edit, or tell FabexCNC to prepend GCode that I specify. I’m just trying to figure out what that GCode is. Above is me trying various things - based on my understanding of what the GCodes mean. Oh, and I don’t know what PP means.

Toolsetter and ATC for Redline

Elite Series (Masso & Redline) (Gen 1)

UltraPeepi February 8, 2026, 6:06pm 15

I am using a custom post process for FabexCNC

Topic		Replies	Views
Redline CNC RTS-X Motion Controller feature requests Feature Request	14	248	April 17, 2026
ATC and Redline controller wizard Onefinity Easy ATC (Automatic Tool Changer)	23	405	July 3, 2026
Redline atc after setting tool height crashing into tool setter? Uncategorized	0	65	September 7, 2026
ATC - combined auto and manual tool change Onefinity Easy ATC (Automatic Tool Changer)	4	158	May 31, 2026
Machine not stopping for tool changes Controller (Redline) Discussion	7	332	April 14, 2026

Toolsetter and ATC for Redline

Related topics