3D Prints for the onefinitycnc

1

I am really close to the shipping for mine. So i started some 3d prints i thought would be useful. I did not design any of these but thought they would be useful
https://www.thingiverse.com/thing:4589251 Probe holder
https://www.thingiverse.com/thing:4619804 Drag chain’s
https://www.thingiverse.com/thing:3852143 Fences for Myers and PwnCNC
https://www.thingiverse.com/thing:4589673 GoPro mount
I do not receive anything from any of the makers Give credit where credit is due to them.
I forgot to include it but also a xbox controller mount. Mine was a small one so i could nail it on the inside of the leg of the table. i think about any xbox controller holder will be fine just search on thingiverse for one

5 Likes
2

WOW Awesome designs, thank you for sharing them to the forum. They all look awesome! I like the magnet holder on the side of the TP.

-Alex

3

https://www.thingiverse.com/thing:3556529 Cam Clamps untested

2 Likes
4

Check out @RowdyRoman post he has a lot of the items also if you didn’t want to print them.

3 Likes
5

I made some things:
Bumper case for touchscreen: https://www.thingiverse.com/thing:4626909
“uh-oh” clamps: https://www.thingiverse.com/thing:4584289
Toe Clamps: https://www.thingiverse.com/thing:4584288
Socket Dustboot to Fein Vac hose adaptor: https://www.thingiverse.com/thing:4602574
Dust Deputy to Fein Vac fittings kit: https://www.thingiverse.com/thing:4578022
Dovetail slot spoilboard (for cnc cutting- not printing- .obj file): https://www.thingiverse.com/thing:4585056
Drag Chain/raceway brackets: https://www.thingiverse.com/thing:4619804

3 Likes
6

Found the actual chain itself 15x20 https://www.thingiverse.com/thing:4635454
Thx Muddy making that case now:)

2 Likes
7

I’ve also got some 3d models created specifically for the Onefinity.

I second the suggestion of RowdyRoman’s store also - I’ve got a bunch of his parts printed and in use on my machine.

2 Likes
8

Thank you - and the others - for sharing these. I plan to use a dovetail system, and the clamps you made were exactly what I would like to use. I was researching metal hardware options, but like you have the ability to print my own designs. I appreciate that you included the print settings. Have you had any issues with thread wear over time in the PLA pieces?
Tom

9

Yeah, plastic parts won’t be as rigid as metal clamps, but they’re cheap, easily replaced, and seem to be working fine for holding non-metal stock.
Threadwear hasn’t been an issue. I can usually print threads as small as 1/4-20 or M5 pretty well, but it helps to run a proper tap through them just to clean them up a little.

Note there are several files for the clamps: some have threaded holes, some have clearance holes with a hex recess for the appropriate nut.

10

Found this dust collection hose boom here:

4 Likes
11

I had my first monitor drop yesterday. basement floor to boot. This case saved it. Thank you.

12

Hey St0mp,

I like this anti-drop mechanism :slight_smile:

14

Not wanting to create a new thread. I recently ordered the Elite Journeyman with the 80mm spindle mount, and plan on using a shim to reduce the mount diameter until I purchase an air cool spindle. I’m also using a 4-inch hose for dust collection. These are the 3D printer files I’m currently looking at. Anything you might add to this list?

Onefinity CNC Spindle Shim 80 to 65mm

Makita Router Speed Switch Stop

Onefinity CNC Probe Holder

Onefinity 4 Inch Hose Holder

Onefinity CNC Vacuum Boom Digital Files (package)

TSR Onefinity Makita CNC Router Dust Boot Digital STL File