Order the Onefinity: check! Know where to put it: … uhhh…? My current workshop is tiny (perhaps 10 sqm), so I spend just about as much time playing Tetris with 2x4s as actually operating my tools. Throw in a Onefinity Woodworker with a footprint of about 1.8 sqm, and things are starting to become …

Looks good. I hope you’ll consider posting plans, or at least dimensions when you are done. If you are mounting the controller on the cabinet section, what are you going to do about the wires when you fold it? Looking forward to seeing the finished product!

Just finished up my design for a fold down cart too. Planning to work on it some this weekend. [2020-09-11 09_00_34-Window] [2020-09-11 09_01_28-Window] [2020-09-11 09_05_00-Window] Gotta hurry up, machine will be here in a few weeks.

Love the idea of these builds! One possible concern ( @Cdavis also mentioned something similar) with the designs here is that the cables to go from the controller box all the way to the far right Y rail are not currently long enough to reach from the cabinet (as shown in the 3d design) when in the “…

If you flip the Y rails around, so the cables attach in the rear, you would need much less cable. Maybe would work with stock cables.

I plan on cutting the plug off (leaving ~6") then splice in an additional 2’-ish of extra wire if needed to allow for the table flip up/down. There is nothing magical about the wire, its just 2 pair 18gu stranded copper. I found a few 2 pin Molex plug ends on Amazon just not sure which male end the…

DM me if you need measurements on those plugs

Hey all, If anyone is interested in wire extensions please let us know and we can get some made. Talk soon…

@Mark That would be awesome, if you could make like 2’ and 3’ extensions it would help group of folks who want the controller a bit farther from the intended location. I’d rather not hack my new wires apart if at all possible!! Talk soon, Alex

CNC platform / table / enclosure

Accessories

mkngjoy (Josh Sylvester ) September 13, 2020, 9:45pm 20

Here you go. Photos from the end of the right Y cable, but they are all the same connector.

Onefinity Controller Stopping Mid-Program (solved: EMI / Static Build up)

Topic		Replies	Views
The Table basic Original/PRO Series (Buildbotics) (Gen 1)	145	25229	April 9, 2025
Flip up CNC table Gallery	42	10630	May 11, 2021
Table for OneFinity Woodworker	18	4667	February 18, 2022
Cnc Table Hindsight 20/20 Gallery	72	9222	October 14, 2023
Thoughts on my table design? Machine Setups	24	3422	October 10, 2022

CNC platform / table / enclosure

Related topics