I have successfully configured a custom VFD and spindle to work with my Onefinity. Here are my notes to hopefully help others get their VFD working. I started with the Buildbotics How to use a VFD spindle driver documentation. My VFD is the TECO Westinghouse E510 . Wiring You will need to wire t…

Hi Sid, thanks for contact me. I could get the Fulling running with the Onefinity controller, but not at “100%”speed. Onefinity did not help me on configuring the Fulling and recommended me the Buildbotics forum. Buildbotics, on the other hand, just said their Controller software (1.0.3) has the Ful…

Sorry Aiph5u, the board wouldnt let me keep posting yesterday, everything seems to function properly. the only thing Im not sure of is it takes the spindle a couple of seconds to respond to commands, that might be normal… we will see

Hi Mauro, not sure if you got my return email yesterday but will repost it here. try this link, it might help Support Fuling Model DZB200 Series VFD - githubmemory

HI Sid. I’ve checked the configuration and everything works perfectly. I could not set value for command line “0”(status-read) because It has a default value of zero that could not be changed. On command line “1” (max-freq-fixed) I had to set a value of 8000 because my spindle is 800 Hz. Everything …

Hi Mauro, so glad to hear it works. Cheers, Sid

Hey all, I just got a private message of someone wanting to use a H100 VFD, asking if it is supported by Onefinity. The answer is, the settings for the compatible V70 VFD are in the 1.0.9 source code but no entry to select it as ‘tool-type’ :frowning: . What you can do easily and at once on your O…

Hello I am getting the onefinity cnc and wanted to use my fuling VFD. I can’t seem to open the link. Thanks!

Welcome to the forum and Onefinity community! :grinning: If it is the github link it will not open for me either.

Thanks. Super excited to start using this machine! Just hoping to get the process going smoothly without hiccups. Hopefully there is a secondary link available!

Configuring a custom VFD and spindle

Spindle/VFD (Aftermarket/Unsupported)

bdunn24 (Brian J Dunn) October 4, 2022, 8:20pm 32

Yes that was me. Sorry about the pm. But any way the settings worked perfectly. Thanks you and Sid!

Zhong Hua Jiang CNC Spindle,110V 1.5KW and H100 VFD. Need Modbus settings

Topic		Replies	Views
Zhong Hua Jiang CNC Spindle,110V 1.5KW and H100 VFD. Need Modbus settings Spindle/VFD (Aftermarket/Unsupported)	23	4105	January 14, 2024
What is needed to wire up 2.2kw 220v Spindle and VFD? Spindle/VFD (Aftermarket/Unsupported)	26	15069	September 8, 2022
Spindle running at half speed Troubleshooting (X35/X50)	31	7216	January 21, 2025
Woodworker speed control / vfd settings? Spindle/VFD (Aftermarket/Unsupported)	23	1516	August 28, 2025
No-Name YL620-A VFD Spindle/VFD (Aftermarket/Unsupported)	107	13863	February 5, 2022

Configuring a custom VFD and spindle

Related topics