Error msg. Please give me advice (solved, toolpath cutting out of cutting area)

[DsHardWoodCreations]

Been trying to do my first cut which is my spoil board. Using carveco. When i go to press start i get this error msg.

[HardtailSr (robert mainville)]

the machine is actually showing you that you have set the area wrong. see the red cutting area there is now way the spindle could cut that area. reduce the size of your cutting area and check the homing.

[OnefinityCNC (Onefinity CNC Official ✅)]

Toolpath Warning: Over/Under (BB Buildbotics), Soft Alarm (Masso), Or Toolpath Warning Exceeded (Redline)

While this FAQ was originally wrote for the Non-Elite Machines, the same principal applies to both. Over/under on non-elite controllers and soft alarm on elite controllers mean the same thing, so the below principals apply to all machines. Many new users to the Onefinity CNC often get the machine unboxed, assembled, and moving in a few minutes without ever needing to look at instructions. But then they home the machine and are alarmed when their screen looks like this: (Left picture is non-e…