Got everything built and it is looking good! I’m moving into the final calibration phase on my Elite Gen 2 Foreman (Redline HDI / 2.2kW Spindle) and I am wondering if anyone has posted a dedicated maintenance video for the G2E series yet? Since this series uses the closed-loop motors and the updat…

Here you go! [image] Onefinity CNC Elite Gen 2 Maintenance Guide Elite Series Gen 2 Official FAQs Onefinity CNC Elite Gen 2 Maintenance Guide Keeping your Onefinity CNC Elite Gen 2 clean, lubricated, and properly checked is one of the easiest ways to protect yo…

As far as I have found, there are magnetic shields on the side of the Z-Gantry where it meets the rail, and on the side rails, just under the front home stop guide pieces. No screws, just magnets. 3-in-1 oil, not the oil you may have gotten with the CNC or other accessories, apparently. As far as sc…

What I would find useful: have the RedLine controller count up the number of minutes/hours of use and at appropriate times pop up an indicator that lubrication should be applied. (I’d happily write a program to do this if someone gave me info on the API, etc.)

Bump. There are no maintenance instructions I can find beyond a very short blurb in the manual that states the following: Apply 3 in one oil into the oil ports of the Ball Screws. Jog the machine to it’s X,Y and Z limits while applying oil to the oil ports in a few different locations. Wipe off an…

Maintenance video dropped: https://youtu.be/CohIyflX42g?si=cWCue_yKg0l3b3W-

G2E Series Maintenance

Gen 2 Elite Series

OnefinityCNC (Onefinity CNC Official ✅) May 17, 2026, 11:32pm 6

Here you go!

Topic		Replies	Views
Onefinity CNC Elite Gen 2 Maintenance Guide Elite Series Gen 2 Official FAQs	0	84	May 17, 2026
Gen 2 Mainenance Video (FAQ) Elite Series Gen 2 Official FAQs	0	123	July 1, 2026
Oil port location on the Elite Gen 2 machines Gen 2 Elite Series	10	225	May 20, 2026
Maintenance of onefinity Original/PRO Series (Buildbotics) (Gen 1)	15	4209	January 25, 2022
Gen 2 Elite Journeyman Bearing Sound	0	531	March 3, 2026

G2E Series Maintenance

Related topics