Jtech 14watt laser

[Alphonse (Alan)]

Here’s how you turn it on:

Jtech Laser start up sequence

The proper start up sequence is: 1. Turn the key first to allow the engaging of the relay coil. 2. Then, press the reset button to hear the “click”. 3. Then, the power switch will work to turn the driver on and off. If you leave the driver plugged into a power strip which is on, then you can just use the laser driver power switch to turn it on and off. If you lose power to the laser driver, or turn the power strip off, then you will have to press the red reset button again when you want to p…